Page 2 of 3
Posted: Sat Jun 05, 2010 2:42 am
by irishpaving
Suggers you and your photo shop....it's called a good camera lol chimney stacks.... who builds them anymore
It is nice to see such a tidy job. I think for that your alright with the barrow. LLL didnt offer me a mixer when i had to mix 5 ton in the barrow the @*#% 
???
Posted: Sat Jun 05, 2010 5:46 am
by lutonlagerlout
ahh but thats only an hours work for you colm :;):
if anyone with the means to pick it up, needs a mixer (to use mind not to flog) they can have it for a drink
cheers LLL
Posted: Thu Jun 10, 2010 10:11 pm
by r44flyer
I might take you up on that one LLL! In the next couple of months I'm laying 24m of haunching for driveway edges, and about 35-40sqm of patio which was previously laid on...soil! Digging out by hand as no access for a digger.
Mongo... nice neat job, mate!
Posted: Fri Jun 11, 2010 7:35 am
by seanandruby
Are you going to install something around the edges and side of the shed? Only ask, because, when you build your wall, it will be a fecker getting the mower in and is wasted ground really serving no purpose.
Posted: Sun Jun 13, 2010 5:14 pm
by mongo
seanandruby wrote:Are you going to install something around the edges and side of the shed? Only ask, because, when you build your wall, it will be a fecker getting the mower in and is wasted ground really serving no purpose.
Yeah, im either gonna take the turf off and stonechip it, or topsoil it and have some plants growing up round the fences. Although i dont want plants that are going to grow over where the patio is going to be...
Posted: Sun Jun 13, 2010 5:19 pm
by mongo
So ive only made a little progress. I found out the other week the flags are not going to arrive until the end of June so i stepped off the gas a little.
Ive laid the retaining wall made up of concrete bricks, and then another level of smaller concrete bricks on top. The idea will be to render the wall and have the sides of the walls running down in a slope to the front of the patio.
I think i dug down a little too much (i blame the pick axe), so had to order up another 2 tons of type 1. Think the level of it is almost correct now, as with the mortar base the flags should just sit slightly above the grass level.
Posted: Sun Jun 13, 2010 6:49 pm
by rab1
looking good mate, but how do you get your grass to be so green? :p
Posted: Mon Jun 14, 2010 11:41 pm
by Suggers
I've always preferred my path or paving slightly below the grass level. Makes mowing a doddle. It's traditional. When it's proud, looks like a council municipal job.
:p
Posted: Fri Jul 02, 2010 10:34 pm
by mongo
well after waiting a month and a bit for the slabs they have arrived, im not overly impressed though 2 arrived cracked and the smaller slabs were a bit loose so have rub marks:
alot of them have saw marks and black deposits on them:
Now the cracked 600x900, is what most of them look like they are all fine, majority of the 600x600's are fine, and majority of the 600x295s are fine. However the majority of the 295x295 are marked and scraped.
Is it possible to get rid of the blackish deposits on them? Or would i be better off taking it up with the company i purchased them from?
Posted: Sat Jul 10, 2010 3:21 pm
by mongo
Ive decided to crack on and use the slabs i have, will take up the broken ones with the company i purchased them from, see what they say.
Today i rented a whacker from HSS (£10 off hire if over £40 ex vat if order online) damn they are heavy! Went for the medium 16.5kn. Seems to have made the sub base solid.
This leaves me with rough 30mm of mortar mix for the base for the slabs, so the slabs will sit flush with the grass. Heres a piccy, not so sunny here today!
Still need to finish off the wall down to the front and then render them.
Posted: Sat Jul 10, 2010 4:00 pm
by lutonlagerlout
looking good mongo
crack on mate, get the flags down
LLL 
Posted: Sun Jul 25, 2010 9:37 pm
by mongo
Well i rented a mixer from HSS this weekend and cracked on. Was unable to start until 5pm last night so finished up at 9pm and this was what greeted me on sunday morning:
It was time to crack on, it ended up going on around 35mm of a wet mix to get the flags to the correct level. This is what it looks like at the end of today, i still need to render the walls smooth (they aren't 100% straight) and paint them white:
Cant thank the info thats available on this site enough, as i havent done this before and its turned out resonably well!
Looks like i will have to pick up some romex, what would be the best romex product to cover the pointing needing done?
Posted: Mon Jul 26, 2010 12:25 am
by lutonlagerlout
rompox easy will be ok in that application mate
you should be well proud a fine looking job mongo
fair play to you
LLL
Posted: Thu Jul 29, 2010 3:34 pm
by simeonronacrete
SBR (Ronafix) in the mortar will give you resistance to water penetration and subsequent freeze/thaw damage and debond of the blocks.
If you've never experienced this then it's hard to justify the cost of Ronafix in the mortar. But if after putting in all that effort and cost the blocks come loose, you'll wish you had.
See the Ronafix For Bedding Mortars guidance sheet. For your application you can use less Ronafix and more water, reducing Ronafix from 14 litres to 9, and upping the water from 4 litres to 9. Or by volume this becomes 1:1 Ronafix : water added to the cement and sand.
The mix for the primer remains as 1:1 Ronafix:cement.
Posted: Thu Jul 29, 2010 3:52 pm
by cookiewales
simeonronacrete wrote:SBR (Ronafix) in the mortar will give you resistance to water penetration and subsequent freeze/thaw damage and debond of the blocks.
If you've never experienced this then it's hard to justify the cost of Ronafix in the mortar. But if after putting in all that effort and cost the blocks come loose, you'll wish you had.
See the Ronafix For Bedding Mortars guidance sheet. For your application you can use less Ronafix and more water, reducing Ronafix from 14 litres to 9, and upping the water from 4 litres to 9. Or by volume this becomes 1:1 Ronafix : water added to the cement and sand.
The mix for the primer remains as 1:1 Ronafix:cement.
have been in the game for years thats over specked by a long way rompox easy will be far easier for the diy boys am sure your spec would cap the leaking gulf oil well :p