Posted: Sat Oct 24, 2015 4:19 pm
yeah we have a geith like that on our older 13 tonner big 42mm nut to spin rd clamps down on the back pin
The Brew Cabin
Paving, Drainage and Hard-landscaping in Britain and Ireland
https://ext.pavingexpert.com/brewcabin/
My new 3t excavator
https://ext.pavingexpert.com/brewcabin/viewtopic.php?t=14134
Page 2 of 2
Posted: Sat Oct 24, 2015 4:48 pm
Has it got a cup holder?
Posted: Sat Oct 24, 2015 6:29 pm
2 cup holders, and a narrow pocket for mobile fone to lay in, and a radio...
as Giles said i change bucket more often to the right one for the job as it takes 30 seconds,
only draw back from old 3t is the fuel tank size had been reduced by 20 litres,
had a disaster last week, a tin of maker spray fell out of cab onto a rock and punctured... blue spray all over the door and up side of machine... just need some thinners to remove it MSH
Edited By msh paving on 1445707983
as Giles said i change bucket more often to the right one for the job as it takes 30 seconds,
only draw back from old 3t is the fuel tank size had been reduced by 20 litres,
had a disaster last week, a tin of maker spray fell out of cab onto a rock and punctured... blue spray all over the door and up side of machine... just need some thinners to remove it MSH
Edited By msh paving on 1445707983
Posted: Sat Oct 24, 2015 6:32 pm
As long as it has a cup holder I like it. Radio's just a bonus
Posted: Tue Oct 27, 2015 7:13 pm
Marker spray cans need to be treated like potential bombs!!!!! I've had similar happen to me!!!!!!! 
Posted: Wed Oct 28, 2015 9:12 pm
I refused to use yellow spray line after what happened to me
Edited By GB_Groundworks on 1446066774
Edited By GB_Groundworks on 1446066774