Page 2 of 2
Posted: Sat May 03, 2014 3:47 pm
by lutonlagerlout
^^ what mick said
always have a lightweight block to hand
i have noticed after cutting bricks the saw goes much faster through CBP or flags
LLL 
Posted: Sat May 03, 2014 5:21 pm
by dig dug dan
Thanks. Will give it a try
Posted: Sat May 03, 2014 5:59 pm
by DempseyLiverpool
I've been using these for a while now do the job and last for ages.
Cut sandstone ( mostly raj ) limestone, granite and concrete with ease and good price.
Always wet cut.
http://www.screwfix.com/p/erbauer-turbo-jet-blade-300-x-3-x-20mm/60289
Posted: Sun May 04, 2014 11:34 am
by GB_Groundworks
Dan is your belt ok on your ts400 sometimes they stretch and slip so loose cutting power etc
Posted: Sun May 04, 2014 2:23 pm
by dig dug dan
yep its tight giles. even tried the blade on my mates machine.
Will "sharpen" it and see what happens