The Brew Cabin

Posted: **Wed Jun 08, 2011 6:55 pm**

his villa in spain. :p

Posted: **Wed Jun 08, 2011 10:28 pm**

our surfacing lads are scouring ebay to buy as many old haemmerlin as possible as the new ones are sh!t, spot welded not bolted together and teh skips fall off after a few weeks. theyve been drilling them and coach bolting them before they fail. we have a few old haemmerlins that are good and a big american style one from cost co.

these look good hehe

Posted: **Thu Jun 09, 2011 12:32 am**

Nice wide wheel for the scaffy i mean skip ramp

Posted: **Thu Jun 09, 2011 6:48 am**

criss these are the ones we use Trallnor Self Assembly Wheel Barrow T120G they are one of the best

Posted: **Thu Jun 09, 2011 10:35 pm**

How much are they Cookie?

Posted: **Fri Jun 10, 2011 6:48 am**

jonnyboyentire wrote:How much are they Cookie?

i have paid arround the 50 pound mark there top class

Posted: **Fri Jun 10, 2011 9:25 am**

i ended up going to b and q. cheap skated for the chillington 33 quid. they had a cracking jcb barrow up there ,69 quid though

.

Posted: **Fri Jun 10, 2011 9:29 pm**

the manufacturer of the black brit ones also manufacturers and higher level model in yellow I got two at about Â£40 ea and they are blinding better the hammerlins.

yellow one at the bottom of this page

Posted: **Sat Jun 11, 2011 2:03 pm**

Here is, as promised, pics of our two barrows

They are 20+yrs old, running roller bearing wheels and trailer tyres

Have been welded/strengthened countless times

A decent barrower can do a tonne of gear in six barrowfulls on level ground.

and the best ped roller you can buy, Mortimer CS71 tightedge, superb bit of kit, makes anything else (Bomag inc) feel like a right antique.

Edited By Dave_L on 1307797940

Posted: **Sat Jun 11, 2011 11:01 pm**

Thats a good roller. mine has the 2" lip on the light side. it got a breaker unit on?

Posted: **Sun Jun 12, 2011 7:34 am**

Nope, no breaker unit on the roller, got a couple of JCB Beaver packs, ideal.

The Brew Cabin

Wheelbarrows