Page 2 of 3
Posted: Tue Jan 08, 2013 9:23 pm
by Dave_L
Adobe Reader X is what you want 
Why do you want to edit pdf files?? Using Word '10 you can save as pdf etc etc
Do you send your quotes out as pdf files or word docs?
Posted: Tue Jan 08, 2013 9:27 pm
by Kuts
all my templates (with logos+) are in pdf files, i had it all setup on my old computer but it died 
Posted: Tue Jan 08, 2013 9:32 pm
by Dave_L
Can you not use the templates etc in Word, then save as pdf? That's what I'd do.
Posted: Tue Jan 08, 2013 9:39 pm
by Kuts
No when i open with word it turns go symbols!
got 3 quotes and a confirmation of order i HAVE to get sent off tonight aswell!
i used to use adobe illustrator but cant find a *working* version again :rock:
Posted: Tue Jan 08, 2013 10:01 pm
by henpecked
Kuts wrote:No when i open with word it turns go symbols!
got 3 quotes and a confirmation of order i HAVE to get sent off tonight aswell!
i used to use adobe illustrator but cant find a *working* version again :rock:
AI_CS2_IE_NonRet.exe in the original post.
If you're running Win7 ....
1. Right-click each file (.exe file)
2. Select Properties then go to the Compatibility tab.
3. Put a check on the “Run this program in compatibility mode for� then select the previous OS which do you think it worked. For your case select Windows XP with Service Pack 3
4. Then under Privilege Level, place a check on “Run this program as administrator�
5. Click Apply then OK.
Posted: Tue Jan 08, 2013 10:10 pm
by Kuts
Thanks, i'm on with it now
Posted: Tue Jan 08, 2013 10:17 pm
by rimexboy
this site is great its about paving but you guys cover the lot... fantastic...
Posted: Tue Jan 08, 2013 10:58 pm
by Kuts
Sorted.
Had to send the PDF off to http://www.pdftoword.com (handy tool) then edit in word and save as pdf.......
The adobe didn't work as when i tried to open cs2 it opened cs6?
I can have a cheeky chat with Mr Daniels before bed now :p
Posted: Wed Jan 09, 2013 7:42 am
by GB_Groundworks
ive got the legit CS6 suite although the discounted student one, i use it daily, may 16th this year the memorial flight will be back at derwent reservoir. i shall be there camping out over night for best spot with about 4 cameras and two of my mates, its magical been 15 years ago and 5 years ago.
this is faked...
http://www.youtube.com/watch?v=KBJYA9H68Zg
Edited By GB_Groundworks on 1357717439
Posted: Wed Jan 09, 2013 10:46 am
by Tony McC
PDF Architect lets you edit PDFs.... www.pdfarchitect.org/
Posted: Thu Jan 10, 2013 9:17 am
by vmlopes
A little rumour that has snowballed on the net, Adobe is not giving away CS2 for free !!!
On behalf of Adobe Systems Incorporated …
You have heard wrong! Adobe is absolutely not providing free copies of CS2!
What is true is that Adobe is terminating the activation servers for CS2 and that for existing licensed users of CS2 who need to reinstall their software, copies of CS2 that don’t require activation but do require valid serial numbers are available. (Special serial numbers are provided on the page for each product download.) See <http://forums.adobe.com/thread/1114930>.
http://www.forbes.com/sites....or-free[quote]
Posted: Thu Jan 10, 2013 10:09 am
by Tony McC
So: has anyone here successfully installed CS2 from the download mentioned previously?
Posted: Thu Jan 10, 2013 10:12 am
by henpecked
Depends on what OS you are running. Have a go at this :
1. Right-click each file (.exe file)
2. Select Properties then go to the Compatibility tab.
3. Put a check on the “Run this program in compatibility mode for� then select the previous OS which do you think it worked. For your case select Windows XP with Service Pack 3
4. Then under Privilege Level, place a check on “Run this program as administrator�
5. Click Apply then OK.
ignore disk 1 (we will come back to this)
Click disk 2 - but change the Save Files in folder destination to
C:\Creative Suite CS2\Adobe Creative Suite 2.0\
be default it goes to the wrong folder of C:\Creative Suite\Adobe Creative Suite 2.0\ - This later brings up an error of insert disk 2.
If it says Unable to create the specified output folder! - just click OK
Click Next
---------------------
Click Disk 3 - making sure the address is C:\Creative Suite CS2
Click Next
--------------
Install the Extra Files if you want to
--------------
Now Click Disk 1 - Destionation folder - C:\Creative Suite CS2
Ignore Quicktime 6 message
Accept Agreement
Enter Serial - 1130-1414-7569-4457-6613-5551
Now you need to change the location as C:\Program Files (x86)\Adobe is not valid
change it to C:\Progra~2\Adobe
If the next button stays greyed out, click back then go forward with the next button. All should now be good
Install the entire suite or just the components you require.
Select Do not Register on drop down on the registration page
Posted: Thu Jan 10, 2013 10:13 am
by henpecked
vmlopes wrote:A little rumour that has snowballed on the net, Adobe is not giving away CS2 for free !!!
On behalf of Adobe Systems Incorporated …
You have heard wrong! Adobe is absolutely not providing free copies of CS2!
What is true is that Adobe is terminating the activation servers for CS2 and that for existing licensed users of CS2 who need to reinstall their software, copies of CS2 that don’t require activation but do require valid serial numbers are available. (Special serial numbers are provided on the page for each product download.) See <http://forums.adobe.com/thread/1114930>.
http://www.forbes.com/sites....or-free
No. it was to replace copies which ran on the old servers, but they have uploaded it to public servers and put up active serials,so if you download it and install, no probs.Its massive cock up. The whole of the web seems to be running a copy of legit CS2 now. 
Also, if they were worried by it, they would have pulled the plug on it, its still active as of today. ???
Posted: Thu Jan 10, 2013 5:41 pm
by lutonlagerlout
I got to a point and they were looking for a registration code ,so i gave up and deleted the lot
sketch up is near enough for me
keep chipping away at it cookie,its doable
LLL