38m2 paving slabs and a 3.5m2 paving circle... - Looking for a quote or rough cost idea
-
- Posts: 2
- Joined: Mon May 19, 2014 10:35 am
- Location: Bedfordshire
Hi all. I have spent many hours on this site and in the forum already. There is some brilliant information here, and makes the task of laying paving myself seem a little less daunting.
However, I would be interested in getting a quote or rough idea what I should expect to pay for the work I am trying to do. It is a new-build and we are moving in next week (Silsoe, in between Bedford and Luton on the A6), and have plenty of things on the to-do list. If the cost of getting the paving done professionally isn't too prohibitive then that is definitely the way I would like to go.
The back yard is pretty much a blank canvas: a layer of top soil over rubble.
I did post the job on mybuilder . com but didn't get any responses.
My better half and I have worked out what we would like to do with the space and i have uploaded a picture of it:
The blue part at the bottom has already been paved by the builder, they have used Bradstone Peak Paving Buff Riven (450mmx450mm) so we would like to continue with these. I appreciate they may not be the prettiest paving, but as long as the quality is decent we may as well use them.
We were thinking of this as the paving circle: http://www.buypaving.co.uk/country....9-p.asp
Thanks in advance, and thanks again for such a great resource!
However, I would be interested in getting a quote or rough idea what I should expect to pay for the work I am trying to do. It is a new-build and we are moving in next week (Silsoe, in between Bedford and Luton on the A6), and have plenty of things on the to-do list. If the cost of getting the paving done professionally isn't too prohibitive then that is definitely the way I would like to go.
The back yard is pretty much a blank canvas: a layer of top soil over rubble.
I did post the job on mybuilder . com but didn't get any responses.
My better half and I have worked out what we would like to do with the space and i have uploaded a picture of it:
The blue part at the bottom has already been paved by the builder, they have used Bradstone Peak Paving Buff Riven (450mmx450mm) so we would like to continue with these. I appreciate they may not be the prettiest paving, but as long as the quality is decent we may as well use them.
We were thinking of this as the paving circle: http://www.buypaving.co.uk/country....9-p.asp
Thanks in advance, and thanks again for such a great resource!
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
what is "Yorkshire Stone Concrete"?
dont they just mean concrete?
did you post the drawing on mybuilder?
no disrespect to the lads on there but generally its the bottom
feeders,they wouldnt like to see all those curves
we are well booked up but even using cheap slabs you are still looking at £80-90 ish a metre as the job has to be done right
I can PM you a couple of numbers of fellas that might be able to fit you in for a quote
cheers LLL
dont they just mean concrete?
did you post the drawing on mybuilder?
no disrespect to the lads on there but generally its the bottom
feeders,they wouldnt like to see all those curves
we are well booked up but even using cheap slabs you are still looking at £80-90 ish a metre as the job has to be done right
I can PM you a couple of numbers of fellas that might be able to fit you in for a quote
cheers LLL
-
- Posts: 2
- Joined: Mon May 19, 2014 10:35 am
- Location: Bedfordshire
Thanks for the response. Not sure about the Yorkshire stone concrete, not really fixed on that particular circle, just a circle that of that sort of size.
I should have described whats going on in the picture a bit better...the curvy bits will be stones/pebbles with an edging. The paving will be just the straight bits on the right and top (that form a T), to keep things simple.
I did post the picture on mybuilder. Been over a week and no responses. By what you are saying, that may be a good thing!
I think I will go back to plan A and do it myself. Will be back here with a few questions I am sure!
I should have described whats going on in the picture a bit better...the curvy bits will be stones/pebbles with an edging. The paving will be just the straight bits on the right and top (that form a T), to keep things simple.
I did post the picture on mybuilder. Been over a week and no responses. By what you are saying, that may be a good thing!
I think I will go back to plan A and do it myself. Will be back here with a few questions I am sure!
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 27
- Joined: Mon May 26, 2014 9:52 pm
- Location: southport
- Contact:
-
- Posts: 712
- Joined: Sat Oct 19, 2013 7:56 am
- Location: South Wales
- Contact:
Same here in S.Wales.johnty wrote:£100 a metre may be the normal down south but up in the north west i think that sort of figure will be very difficult to get regardless of workmanship
For £100/m it would need to be a bit more exotic than riven sandstone.
But it's all relevant, property prices are cheaper this way and so are wages etc.
Cheers
Lemoncurd
Lemoncurd
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 27
- Joined: Mon May 26, 2014 9:52 pm
- Location: southport
- Contact:
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 27
- Joined: Mon May 26, 2014 9:52 pm
- Location: southport
- Contact:
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 712
- Joined: Sat Oct 19, 2013 7:56 am
- Location: South Wales
- Contact:
I think that's reasonable assuming you take your own wages before arriving at the net, suppose that depends on your turnover.lutonlagerlout wrote:so net profit annually is around 12%
does that sound OTT to you?
cheers LLL
Different people work in different ways. When I look at a job, I figure how many days it will take and multiply by the amount needed to cover the daily costs, labour, including myself, and all other yearly and ongoing overheads.
Add this figure to the materials and add 10% which generally makes up for the time when I'm not earning such as holidays, days lost to weather, error in calculations etc.
If I'm lucky there may be a bit leftover.
Cheers
Lemoncurd
Lemoncurd
-
- Posts: 27
- Joined: Mon May 26, 2014 9:52 pm
- Location: southport
- Contact:
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
John its just different business costs around the country
we pay around £240 +vat for 10 tonnes of type 1 here loose
£35 +VAT for bulk bags of aggregate
6 yd skips are now £170 +permit + VAT which means a skip can cost £260 on the road
skilled men £150 a day before stoppages
labour £90 a day before
if you dont pay these rates around here you wont get anyone
most firms round here start at £100 a metre for riven sandstone
its only the lay it on the grass on an inch of sand brigade who can do it cheaper
we are not in it for the glory alone
need to make a profit or what is the point?
cheers LLL
we pay around £240 +vat for 10 tonnes of type 1 here loose
£35 +VAT for bulk bags of aggregate
6 yd skips are now £170 +permit + VAT which means a skip can cost £260 on the road
skilled men £150 a day before stoppages
labour £90 a day before
if you dont pay these rates around here you wont get anyone
most firms round here start at £100 a metre for riven sandstone
its only the lay it on the grass on an inch of sand brigade who can do it cheaper
we are not in it for the glory alone
need to make a profit or what is the point?
cheers LLL
-
- Posts: 712
- Joined: Sat Oct 19, 2013 7:56 am
- Location: South Wales
- Contact:
That puts it in perspective LLL 10T of type 1 yesterday, delivered £165 inc.vat.
8 yd skip £180 if mixed or £140 if inert waste.
Bulk bags not much less £32.
Skilled about £10-12, decent labourer £8 or a donkey for as little as £30/day cash.
But this boom I keep hearing of hasn't reached this far yet.
8 yd skip £180 if mixed or £140 if inert waste.
Bulk bags not much less £32.
Skilled about £10-12, decent labourer £8 or a donkey for as little as £30/day cash.
But this boom I keep hearing of hasn't reached this far yet.
Cheers
Lemoncurd
Lemoncurd