Sett style paving slabs

Patio flagstones (slabs), concrete flags, stone flags including yorkstone and imported flagstones.
Post Reply
philB
Posts: 1
Joined: Wed Aug 31, 2005 5:18 pm
Location: stockport

Post: # 9419Post philB

Same old question but these are slightly different and i dont think they are available now. probably because they are naff but i got them on the cheap!! They are interlocking concrete mould pavers made by bowland when layed together gives the effect of setts/cobbles

I would like to use these for my drive. From reading the forums i feel it would be best on a full cement base. At what depth?

Also any jointing sealing advise?

Sorry if questions are repetative. just want to confirm for scenario.

piccies available

Thanks

PhilB
Top
Tony McC
Site Admin
Posts: 8346
Joined: Mon Jul 05, 2004 7:27 pm
Location: Warrington, People's Republic of South Lancashire
Contact:
Contact Tony McC

Post: # 9453Post Tony McC

Bowland's wet-cast concrete products are usually a bit too soft for use on drveways, but, if you must, then they need at least 100mm of ST1 concrete underneath them. Have a look at the Laying Flags section on the main website.
Site Agent - Pavingexpert
Top
Post Reply

Return to “Flags and Slabs”