Recent work

[lutonlagerlout]

me and the lads barrowed in 6.5 cube in 1 hr 20 minutes
got a sweat on


brickwork started to DPC


saw this in someone's window


brickwork up and cavities filled with leanmix


cheers LLL

[michaelthegardener]

some nice work there did this yesterday afternoon rained on me so I had to pop back this morning to give it another once over with the blower don't like leaving little bits of crap stuck to the pavement



:p

[dig dug dan]

Nice to see you back on here michael. Some serious pruning there. What do you do with the trimmings.?

[michaelthegardener]

Nice to see you back on here michael. Some serious pruning there. What do you do with the trimmings.?

not done anything worth posting about lately just the usual small maintance jobs I shredded them and my wifes uncle had them for his allotment compost

[lutonlagerlout]

it all keeps the ball rolling michael
work is work
cheers LLL

[msh paving]

some concrete work i have done in last few weeks,steel placed sitting on chairs and deck chairs

cocncrete poured, mix was PAV2 with AEA &WRA, Poured and set to falls with laser,vibrostrike,edge trowel,blue trowel,steel brush finish, adostrike curing agent.


this pic was taken before refloat and brush bit off a bad spot in it


before finishing

this was a base for a stationary engine shed,first section needed A395mesh to support a 3 ton engine, 275mm thick rest of area 150mm



A little snapshop of a few jobs MSH

[msh paving]

A base for cycle park


a workshop base

A black limestone patio designed by the gaffer,pointed with GFTK840=, the pics still show a little grout thats needed more brushing of, my boy being a bit slow...lol





getting the sand close to the job

keeping track of the laid slabs and patern


MSH

[lutonlagerlout]

Looks great work from where I am sitting, I cross off flags on the gaffers drawings too!
LLL

[GB_Groundworks]

chimney fitted to the slab from the video spot on level even across 12 metres and lined up perfectly





20mm mesh those rebar guns are the mutts nuts







new job started monday

retaining wall failed. previous owner fancied himself as a builder built his in H block laid flat and no concrete fill, no engineer consultation. so weve gotta fix it, dig out then a reinfoced concrete wall tied into the existing to support it and weep holes cut in,

[dig dug dan]

I spy with my little eye, a gate set too high ???

[lutonlagerlout]

a horse would have a job crawling under that dan :;):
all looks pretty tidy to me,gates on hills are a nightmare
LLL

[lutonlagerlout]

brick and block work up




9 by 7 shed base for a mate waiting for the barbs



extension up lintel high


c30 concrete in the base




roof going on extension at the moment weather permitting
cheers LLL

[Kuts]

rough finish on that concrete Tony

[lutonlagerlout]

its the brutalist look :laugh:
after jay's comments about not tamping and not using the steel float too soon i ended up at half seven in the dark finishing it
will get a photy when the shutter is struck
cheers LLL

[Kuts]

did this ages ago

took till about 2am to get a decent finish

Hate concrete