Other groundworks tasks, such as roads and footpaths, terracing, fencing, foundations, walls and brickwork, tools and plant.
Carberry
Posts: 1366 Joined: Fri Apr 15, 2011 9:05 pm
Location: Edinburgh
Post: # 91504Post
Carberry Thu Jul 11, 2013 9:08 am
Just got a free 40ft trailer delivered for storing gas bottles on, the flooring on it is knackered. Just wondering what you all think is the best solution for flooring?
GB_Groundworks
Site Admin
Posts: 4420 Joined: Sat Aug 09, 2008 3:55 pm
Location: high peak
Contact:
Post: # 91505Post
GB_Groundworks Thu Jul 11, 2013 10:07 am
We use a special ply, forget its name but it's fireproof tough stuff
Normally for flat decks its like 4x2 to stop sliding
Depends on the supstructure of the teailer, photos?
Giles
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
rimexboy
Posts: 916 Joined: Thu Aug 07, 2008 8:31 pm
Post: # 91506Post
rimexboy Thu Jul 11, 2013 10:08 am
Metal will last longer than wood but will cost you more and then you have the weight of it all to think of...
The more it weighs the less it can carry which means less profit... That's why some lorrys have alloy wheels fitted its lighter so can carry more on the back....
higgness
Site Admin
Posts: 255 Joined: Mon Jan 30, 2012 8:10 pm
Location: ireland
Post: # 91512Post
higgness Thu Jul 11, 2013 2:12 pm
Farmers use a 150x32 or 38mm t&g board for their trailers.
Just make sure you get it pressure treated.
msh paving
Site Admin
Posts: 1854 Joined: Tue Aug 19, 2008 7:03 pm
Location: kings lynn norfolk
Contact:
Post: # 91513Post
msh paving Thu Jul 11, 2013 2:48 pm
lorry trailer boards are "iroko" hard wood, think thats how its spelt..MSH
higgness
Site Admin
Posts: 255 Joined: Mon Jan 30, 2012 8:10 pm
Location: ireland
Post: # 91514Post
higgness Thu Jul 11, 2013 4:02 pm
Pourform ply would last a reasonable length of time.
Carberry
Posts: 1366 Joined: Fri Apr 15, 2011 9:05 pm
Location: Edinburgh
Post: # 91563Post
Carberry Sun Jul 14, 2013 10:49 am
Will get some pictures of it up this week. Metal is out of the question, too expensive.
rimexboy
Posts: 916 Joined: Thu Aug 07, 2008 8:31 pm
Post: # 91566Post
rimexboy Sun Jul 14, 2013 1:47 pm
Carberry wrote: Will get some pictures of it up this week. Metal is out of the question, too expensive.
I've got 3 sheets of flat galv 2500x1250x1.5mm if any good but your miles away
rab1
Posts: 1869 Joined: Sun Jun 07, 2009 10:19 pm
Location: scotland
Post: # 91570Post
rab1 Sun Jul 14, 2013 8:16 pm
to thin, for a truck bed needs to be at least 3mm
God loves a tryer
rimexboy
Posts: 916 Joined: Thu Aug 07, 2008 8:31 pm
Post: # 91574Post
rimexboy Sun Jul 14, 2013 9:02 pm
I'm not so sure on that, it's used in cold stores forklift trucks drive over it all day, it all depends on the bracing underneath
Mikey_C
Posts: 952 Joined: Mon Oct 30, 2006 8:24 pm
Location: Bournemouth, Dorset
Post: # 91575Post
Mikey_C Sun Jul 14, 2013 9:10 pm
what about this stuff ecosheet my local builders merchant are advertising "for trailers", although I think they mean smaller ones than yours.
rab1
Posts: 1869 Joined: Sun Jun 07, 2009 10:19 pm
Location: scotland
Post: # 91583Post
rab1 Mon Jul 15, 2013 7:11 pm
I'm not so sure on that, it's used in cold stores forklift trucks drive over it all day, it all depends on the bracing underneath
true
God loves a tryer
andpartington
Posts: 308 Joined: Sat May 27, 2006 9:19 pm
Location: cheadle uk
Post: # 91584Post
andpartington Mon Jul 15, 2013 7:25 pm
i just did my flat bed trannie with wisa ply wood clicky
from clicky
very good guys in stoke
andy
Warning "Dyslexic Fingers At Work" in Cheadle, Manchester UK
cheers andy
rimexboy
Posts: 916 Joined: Thu Aug 07, 2008 8:31 pm
Post: # 91585Post
rimexboy Mon Jul 15, 2013 7:42 pm
What's the gross weight this trailer can carry?
I take it its all sound under the Rotten floor that's already no good or are the supports rotten to?
Also if your carrying gas bottles does it need to be made to a certain specification ?
You may find that this does not suit your needs with the costs that could be involved, you may be better knocking it out and getting one that's ready to roll..
r896neo
Posts: 521 Joined: Wed Feb 22, 2012 9:38 pm
Post: # 91586Post
r896neo Mon Jul 15, 2013 8:28 pm
My reading of it sounds as though this trailer is literally just to store the bottle on in a yard rather than go on the road?
Have you checked the price of the ECOSHEET.....
TO use a brew cabin phrase, its hella expensive