Recent work

[rimexboy]

Was it buy one get one free :p

[lutonlagerlout]

fashion you can buy
style you are born with :;):
that carpet is in a austro-hungarian apartment we rented full of antiques
this is the view

big ceilings
and this is the flat


[url=http://www.tripadvisor.com/VacationRent ... ury-Budape
st_Central_Hungary.html]apartment max[/url]
fantastic digs
LLL

[Kuts]

Nice brothel creepers there Tony

[lutonlagerlout]

whose been talkin'?
haha
I wore them out to a posh restaurant on our last night and the waiter's eyes nearly popped out of his head
LLL

[GB_Groundworks]

saturday moring filled int he trench with 7 ton base and 3 ton 10mm sma in 230mm/70mm layers





our next big job weve taken over this site from some clowns whove been on it 8 months and done nothing, those sheet piles only went in two weeks ago after i visited site with the architect and they had a 3 m upsorted wall of earth with the machine sat ont he edge and men below, the piling they done if i dare call it that is those thin 3mm trench sheets and then slid 12mm ply between them. then the other bit are those k deck ones for concrete floors!! bringing my 10mm 6m ones down

we got to rip out all they done tidy the site up and do all the groundworks then my mates firm is doing the build, these guys were 16k cheaper than him on the build but they were meant to have finished by now. all they have done is a mot blind and a concrete oversite, mot was 300mm compacted theyve got 50mm uncompacted crusher run and the house is in the wrong place. putting the 16 tonner in there next week and sorting it out



yesterday started this at my sisters house, wants her back garden doing as well but so busy with proper paying work gonna have to but her on hold which she aint gonna like.

[lutonlagerlout]

nice work giles,you should be on ground force :;):
travesty ripping that beech hedge out
anyway onwards and upwards
taking down a chimney from top to bottom















job done making good floors and ceilings tomorrow

LLL

[lutonlagerlout]

chipies did the making good so mr lout and his trusty fork bullseye did a bit of hand digging


nice bit of pitch fibre pipe to drop a new IC onto
LLL

[digerjones]

looks like time team have been on a dig.

[Dave_L]

90m2 communal parking area at Seaton in Devon with resin-bonded surfacing over a bitmac base. Everyone very pleased. Can you spot the manhole cover?

[/URL]

[Dave_L]

300m2 10 bay car park extension for out local Village Hall

[/URL]

Overspill car parking area for a local factory (Area due to be built upon within 5 years)

[/URL]

Domestic double-drive overlay

[/URL]

Concrete road break up at a local college, replace Aco drainage with S010 Units and resurfacing with 60mm Ac20 Binder and 30mm AC10 Surface

[/URL]

[lutonlagerlout]

90m2 communal parking area at Seaton in Devon with resin-bonded surfacing over a bitmac base. Everyone very pleased. Can you spot the manhole cover?

[/URL]

just to the right of the tarmac dave,but I had to zoom in hard to see it
fantastic looking work there mate
sells itself
LLL

[Kuts]

Top work there Dave, nice touch with the joint on the drive :p
Get them on your website

[lutonlagerlout]

ic installed on existing pitch fibre run


I dont know about other blokes on here but the phone has been red hot this week ===> at last

talking to some subbies yesterday and sites are struggling to get brickies ,which means one thing
boom time around the corner
LLL

[London Stone Paving]

We've been really busy past couple of weeks. Everyone I speak to now also seems to be flat out. Looks like silly season has started.
Luton, I have just done a similar job at my place. Removed 2 chimmneys top to bottom. I just need to repair the holes in the roof and do the leading now. Only problem is one of the chimmneys, the scaffolders put the poles tight to where the lead work will be so will need to remove one of the scaffolds first. Whats that stuff you used instead of felt?

[lutonlagerlout]

breathable felt steve
the old style pitch felt went out 20 years ago
if you have an asphaltic local to you they will normally cut you a length by the metre otherwise its 70 quid for 50 m
LLL