Type 1 hardcore - Compacted level

Patio flagstones (slabs), concrete flags, stone flags including yorkstone and imported flagstones.
Post Reply
DIM
Posts: 7
Joined: Thu Jun 30, 2005 9:45 pm
Location: Essex

Post: # 8868Post DIM

Hi

Thanks for a great web site...its been very useful.

I have just put down 4 tonnes of type 1 hardcore @ a thickness of 75mm-100mm, the type 1 is at a level of 75mm below the finished patio surface. My finished surface is very important as i have about 5 falls towards a gully i pre-fitted. I have spent time with pegs, levels etc to get the hardcore correct and didnt thick about the hardcore level after compacting.

How much will the level drop after being wacked down? should i skim the lot to allow for a drop or is it minimal...less than 10mm.

Thanks..

BTW...my user name was suppose to stand for Do It Myself...just noticed i'm calling myself Dim..... :p

Tony McC
Site Admin
Posts: 8346
Joined: Mon Jul 05, 2004 7:27 pm
Location: Warrington, People's Republic of South Lancashire
Contact:

Post: # 8873Post Tony McC

It's impossible to say exactly how much the Type 1 will compact - there are so many variables involved. See the Screed Depth FAQ for a brief guide to why it's not an exact science.

However, it's likely that 75-100mm will compact to somewhere around 50-75mm




Edited By Tony McC on 1120216172
Site Agent - Pavingexpert

DIM
Posts: 7
Joined: Thu Jun 30, 2005 9:45 pm
Location: Essex

Post: # 8880Post DIM

Thanks...i have ordered another tonne of type 1 to skim the lot with, otherwise ill have build it up on the bedding mix and thats harder work..

Post Reply