Hi
This is in deed a great site .
My question is how do you set up the base for a patio that slopes in two directions. I tried bending the flag but that would not work.
Do I need two string lines?
Regards
Slopping flags
-
- Posts: 6
- Joined: Fri Mar 11, 2005 9:33 am
- Location: Aberdeen
hmm, i think you might get slapped for not reading the site
This bit details setting out:
http://www.pavingexpert.com/setout01.htm
If you're screed bedding, this bit details how to do cambers and dishes:
http://www.pavingexpert.com/screeding.htm
and if you scroll down to where it says "pro's & cons" you can see a picture of mitre sawn flags which can be used for a change of angle:
http://www.pavingexpert.com/pccflag1.htm
This bit details setting out:
http://www.pavingexpert.com/setout01.htm
If you're screed bedding, this bit details how to do cambers and dishes:
http://www.pavingexpert.com/screeding.htm
and if you scroll down to where it says "pro's & cons" you can see a picture of mitre sawn flags which can be used for a change of angle:
http://www.pavingexpert.com/pccflag1.htm
-
- Site Admin
- Posts: 8346
- Joined: Mon Jul 05, 2004 7:27 pm
- Location: Warrington, People's Republic of South Lancashire
- Contact: