What size whacker plate?

Patio flagstones (slabs), concrete flags, stone flags including yorkstone and imported flagstones.
Post Reply
john37
Posts: 12
Joined: Sat Mar 23, 2013 10:51 am
Location: London NW11

Post: # 88504Post john37

We need to compact crushed brick for our 60 m2 patio sub-base (100 mm deep) and also for a 200 m2 ground floor house sub-base which I guess should be 150 mm deep(?) Would the Evolution Hulk 2.4hp Petrol Powered Compaction Plate be good enough to do the job? It has a claimed 10kN compacting force. It's on sale for £250.

This is cheaper than the cost of multiple hires of say a roller or a Belle PCXL 320 whacker from our local tool hire. As a registered charity we have some volunteer labour so making multiple compaction passes would be fine if it will work.

Any advice please?

digerjones
Posts: 889
Joined: Fri Jan 18, 2008 9:32 pm
Location: cheshire

Post: # 88506Post digerjones

where are you? you can borrow my wacker or roller if your near. the wacker your on about should do the job, but i am no expert.
dylan

john37
Posts: 12
Joined: Sat Mar 23, 2013 10:51 am
Location: London NW11

Post: # 88507Post john37

Hey Dylan, amazing offer :) We're in London NW11 is that possible?

We're not ready for it yet, got to get two steel box frames in and drainage for patio and house, and take out 4 fireplaces - and get the bricks crushed...

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 88514Post lutonlagerlout

i fear dylan is too far away john and the pikeys relieved me of mine
the main thing with a wacker is weight and compaction
it needs to be minimum 65 KG and preferably over 85kg
the big diesel ones exert a lot of force
LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

local patios and driveway
Posts: 1568
Joined: Mon May 10, 2010 9:58 pm
Location: Gatwick
Contact:

Post: # 88524Post local patios and driveway

I wouldnt be happy with 10kn mine is 16, if you want to pick it up from gatwick area you are welcome to borrow it

john37
Posts: 12
Joined: Sat Mar 23, 2013 10:51 am
Location: London NW11

Post: # 88527Post john37

Hi Dan that's a great offer, thank you. I'll send you a private message if that's ok
John

digerjones
Posts: 889
Joined: Fri Jan 18, 2008 9:32 pm
Location: cheshire

Post: # 88541Post digerjones

like tony says bit far away for you to nip down, i'm in cheshire. dan will sort you out.
dylan

Post Reply