Recent work

[bodgeitandscarper]

You got wifi yet cookie? lets be looking at this design then!

[cookiewales]

Wi fi crap no snow but cold jobs coming together can't work the camara

[Dave_L]

woke up to 10 inches at my house

My wife when she behaves has been known to wake up to that too.

[GB_Groundworks]

woke up to 10 inches at my house

My wife when she behaves has been known to wake up to that too.

did she finally get bored of you and buy a rampant rabbit?

[Dave_L]

Now that would be telling!!!!!!! :p

[Injured]

Couple of pics of last Job.



And patio at the back



Client is sorting out the grass himself otherwise I would have sorted the soil and grass where it meets the kerbs.

[rimexboy]

Very nice I love the curve on the rear patio, very nice

[lutonlagerlout]

sweet as a nut George
how come you didnt make it work flags to the back of the kerbs?
some very tidy work there mate
LLL

[Injured]

Because some idiot (ME) put the line on wrong side of pins and for some unknown reason I didnt double check until the next day when kerbs were already set. Well spotted though Tony.

Thanks This weather is stopping me finish this job too as there is a front wall to finish off but everytime I said I was going to finish it it has either rained or been too cold. So still not been paid yet

[cookiewales]

Nice work Bruce and Lll giles am looking at the brinno 200 with waterproof case it looks cookie proof and needs to be here is a link to my blog no writing yet but some pictures for you to pick thru had a gruler today up at 4 train to York now on last leg back to Andover from London http://originalstonepaving.blogspot.co.uk/?m=1

[lutonlagerlout]

we have all done it George
that horrible feeling when you realise it

I took some levels before and fecked them up
poured an oversite slab and only when the walls came down did i realise i had poured to finish floor level and not 65mm below for the screed
a very arduous and expensive weekend followed

your stuff looks top notch though
bit they are well chuffed
LLL

[dig dug dan]

Monster moves today. relocate a 3m x 6m shed onto a new base at a school. Why dismantle when you can move in one go!


shed lifted using the avant



trailer slid underneath!



its on the move


tilted into position


All done!


could not get the shed anymore square on the base to start as the avant wheelspun on the soft ground, so using planks and the pallet forks, we slowly slid it over!



Edited By dig dug dan on 1364580731

[lutonlagerlout]

you have cojones dan
i have seen smaller sheds than that disintegrate when lifted
nice work
LLL

[dig dug dan]

it was worrying when the trailer wouldn't lower as the weight was too far back. but three of us stood on it and it did the trick.

[rimexboy]

luv it pmsl making good use of what you have, health and safety all the way,