Photies of calibrated flagstones - Needed urgently

[Tony McC]

I'm trying to complete an article about how tastes in imported stone paving has changed over the last 20 years or so and to illustrate a particular point, I need a photie or two of the *underside* of a strip-milled/calibrated flagstone, the bit with all the parallel saw cuts.

I can probably get one when the weather improves next week, but seeing that I'm trapped indoors until then and I want to get this piece done and dusted, I thought I'd ask if anyone had anything that might be suitable?

It needs to be a 'modern' imported stone. I have plenty of photies of strip-milled Rossendale flags from years gone by, but I need summat to show how we've re-discovered old techniques.

[mickg]

I have the fairstone driveway setts with the parallel saw cuts in 3 sizes, are they any use ?

[Carberry]

Just took a few photos of a 2x2, where should I email them?

[Tony McC]

Mick - send 'em over and I'll have a look.

Carberry, and anyone else, tony @ pavingexpert dot com will reach me

[mickg]

I will take some photos tomorrow

[GB_Groundworks]

do you still need them? think we have some in teh yard,

got some photosof calibrated 22mm flags that witha straight edge on have a 15-20mm bend in them!

[Tony McC]

A few Brew Cabin Irregulars have sent in some photies - Michael, Noony, Stewart, Max and others - but I'm always happy to see new ones, just in case they illustrate a particular point.