Geo-grid sick of it sitting in the lock up so used it
smashed all the slabs up with the 14lb persuader before we spread the type 1
digging it out himself and just having us for a day he got his 30M done for £1000
which is proper mates rates in anyone money
LLL
not at all sean they are there
originally i told him to dig them out but as he was tipping the soil in his back garden he wanted to leave them
i went over them and smashed every one with the persuader before we spread the stone
he used the mud in his back garden (why i dont know?) so 30m for a grand is cheap in anyones money
i reckon he saved himself £600 by digging it out himself,plus the wall kerbs and pavement were insitu so no additional concrete work was required
anyway the bottom line is it can be done on a budget with a will and a way
cheers LLL
Nice LLL that's the way to do it! if only every day was like that ( it is for some pikeys...not saying your a pikey BTW)
Well back to reality got Home at 3:30am after abusing my heart and liver for a week back in work for 7am 450m2 of CBP to lay half is lift and relay! Full reality check or wot!
the concrete imprinter
i rolled the effing oversite then forgot to take any pictures doh!
and a little bit of flemish bond weatherstruck in luton multis
£1.20 a brick EEK!
sailor course and tile creasing to go on today
give it till it hurts fellas
LLL
Tony were did you get roller from? Is it a Bronze one doing a steep concrete drive up in the hills and was going to brush it but that be perfect can get them from speedcrete but they're expensive.
Nice brickwork, the bricks we are using are £600 for 530 imported from Belgium. Told the brickie to be more careful than usual hehe
Giles
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
tony very neat brickwork, we were doing the same tother week. my brickie is the one with the skill and the knowhow i just copy best i can. sure he called it weatherstruck and cut.
it is indeed weather struck and cut dylan
finished the sailor and tile detail this AM
haggis texted me to let me know he was gonna be on the manor
and this happened
cleared up later,so we did this detail
we had to use 80 by 80 angle iron as there was an existing RSJ stopping a normal L10
each brick had to be cut 3 times to make a pistol shape to disguise the existing steel
the pulvex blade is still going strong
well impressed
LLL