Pic = non-slip
-
- Posts: 3
- Joined: Mon Feb 20, 2012 7:36 pm
- Location: east riding yorkshire
Hi, looking for a reliably non-slip material for the drive and patio. My husband has problems with mobility / lack of balance so we need something easy and safe to walk on in all conditions, also needs to be capable of use by small van >3 tonne and car.
I realise that there are no 100% guarantees on anything and extreme weather conditions occur, but am looking to limit risk as much as possible.
There's no gradient on the land area.
Have thought about PIC, seems to be low maintenance which is also important, but can it provide the spec that I need?
Any help would be greatly appreciated.
I realise that there are no 100% guarantees on anything and extreme weather conditions occur, but am looking to limit risk as much as possible.
There's no gradient on the land area.
Have thought about PIC, seems to be low maintenance which is also important, but can it provide the spec that I need?
Any help would be greatly appreciated.
-
- Posts: 1990
- Joined: Sun Mar 25, 2007 10:49 pm
- Location: N/Ireland
Is this for grant work or are you doing it on your own. If you're getting a grant then there will be specs provided by the council as to how it should be done if not then a reputable paver/ Tarmacer will be able to advse you on the best surface for your needs. Pic looks good when done well but it's so hit and miss and it probably takes the lions share of complaints on here from unhappy clients. You've only got one chance to get it right and it can't be fixed if it's not coupled with the fact that there are more idiots out there doing it than pro's makes for a huge risk. Get a few contractors round from each discipline and tell them your requirements and see what they can come up with also if you're funding it yourself you should enquire about any grant assistance available from the council etc.
Can't see it from my house
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
the issue here twooks is not so much the surface as steps and something to grab hold of
paving and drives are much of a muchness slip wise
but ideally hubby needs a railing to steady himself
as pablo said PIC isnt really suited to the uk
block paving on the drive and PCC slabs at the rear,with some sort of handrail would be my advice
cheers
LLL
paving and drives are much of a muchness slip wise
but ideally hubby needs a railing to steady himself
as pablo said PIC isnt really suited to the uk
block paving on the drive and PCC slabs at the rear,with some sort of handrail would be my advice
cheers
LLL
-
- Posts: 1568
- Joined: Mon May 10, 2010 9:58 pm
- Location: Gatwick
- Contact:
-
- Posts: 125
- Joined: Tue Jun 07, 2011 10:32 am
- Location: Stockport, UK
-
- Posts: 373
- Joined: Tue Feb 18, 2003 3:11 pm
- Location: Essex
- Contact:
Ronacrete Resin Bonded Surfacing will give you a very low risk of slip as determined by the UK Slip Resistance Group and indicated by our test results.
Maintenance to keep the surface clean and free of slip and trip hazards is essential as is the use of correct footwear. There are many pages of advise on how to reduce the risk of slips and trips from the HSE - HSE Slips and Strips.
Maintenance to keep the surface clean and free of slip and trip hazards is essential as is the use of correct footwear. There are many pages of advise on how to reduce the risk of slips and trips from the HSE - HSE Slips and Strips.
Simeon Osen
Ronacrete Ltd - http://www.ronacrete.co.uk
Tel: +44 (0) 1279 638 700
Follow us at http://www.twitter.com/Ronacrete
Ronacrete Ltd - http://www.ronacrete.co.uk
Tel: +44 (0) 1279 638 700
Follow us at http://www.twitter.com/Ronacrete
-
- Posts: 3
- Joined: Mon Feb 20, 2012 7:36 pm
- Location: east riding yorkshire
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 162
- Joined: Sun Jul 17, 2011 1:21 am
- Location: Essex
Hi - the main reason PIC is not that popular in the UK is due the fact that too many cowboy "specilaists" (generally via a franchise) have given the product a bad name through abuse over the years. Shoddy workmanship has often resulted in cracking, spalling and dusting of the surface after only a year or two requiring either extensive repairs or a complete removal and replacement - in a high proportion of cases at the client's expense!!
If you are seriously considering going down the PIC route, only use a highly reptuable company. One that comes to mind is Bomanite. An American company, they've been in the buisness for over 50 years (30 or more in the UK if I recall - first time I supplied them with ready mixed concrete was in the early 80's). Their operatives should be well trained in the whole process - however, ask to see some of their work, don't just take their word for it. As LLL quite rightly says, it's a one hit application - it must be done right first time. To be a success requires proper preparation, specifying and receiving the correct grade of concrete (mostly supplied ready mixed), expertly laid and in the right weather conditions.
If done properly, it does look attractive and is generally quite durable.
If you are seriously considering going down the PIC route, only use a highly reptuable company. One that comes to mind is Bomanite. An American company, they've been in the buisness for over 50 years (30 or more in the UK if I recall - first time I supplied them with ready mixed concrete was in the early 80's). Their operatives should be well trained in the whole process - however, ask to see some of their work, don't just take their word for it. As LLL quite rightly says, it's a one hit application - it must be done right first time. To be a success requires proper preparation, specifying and receiving the correct grade of concrete (mostly supplied ready mixed), expertly laid and in the right weather conditions.
If done properly, it does look attractive and is generally quite durable.
Retired DIY'er
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
I'd say if non-slip was a prerequisite then resin bonded would be the ideal surface to go for.
What surfacing is present in the areas currently?
What surfacing is present in the areas currently?
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
- Posts: 3
- Joined: Mon Feb 20, 2012 7:36 pm
- Location: east riding yorkshire
-
- Posts: 1270
- Joined: Mon Aug 10, 2009 8:30 am
- Location: york work anywhere where the stone takes me
- Contact:
-
- Site Admin
- Posts: 4420
- Joined: Sat Aug 09, 2008 3:55 pm
- Location: high peak
- Contact:
Pic is a nightmare in the wet or frost/snow the moulding of it results in a very smooth finish which is like an ice rink last time I walked on pic in just damp I went down hard on my arse so haven't been a fan of it since grr
Giles
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com