Awkward job
-
- Posts: 144
- Joined: Sat Jan 08, 2011 2:48 pm
- Location: Stockport
-
- Site Admin
- Posts: 4713
- Joined: Mon Jun 26, 2006 11:01 am
- Location: eastbourne
giles those skips are for a crane, they weigh a lot and are awkward to tip, you need plenty of room. I wold advise against using a 360 as a crane, apart from light lifting. You can get a round rollover skip but again not for a 360 to lift. You can get a small crane with stabilizers that lift a couple of hundred weight, then there is a merlo ( 360 fork lift with lifting arm attatchment. Maybe a conveyor belt?
sean
-
- Posts: 1951
- Joined: Sat Dec 06, 2008 10:28 pm
- Location: Preston, Lancashire
LLL it sounds like Giles has alot of muck to shift, manual handling will take for ever, and with family living in the house, especially a house like that i doubt they will want blokes with buckets coming through all day, not to mention ply wood everywhere.
Id say get the machine in, and use the skip with the little digger, and just take it slow and steady, just my 2p worth.
Id say get the machine in, and use the skip with the little digger, and just take it slow and steady, just my 2p worth.
-
- Posts: 1951
- Joined: Sat Dec 06, 2008 10:28 pm
- Location: Preston, Lancashire
Or how about unic mini cranes - http://www.unic-cranes.co.uk/?gclid=CIiA3K6Lr6wCFZJc4QodRxM0Hg
Had one on demo once - when i had money, thought of buying one, was pretty good.
Had one on demo once - when i had money, thought of buying one, was pretty good.
-
- Site Admin
- Posts: 4420
- Joined: Sat Aug 09, 2008 3:55 pm
- Location: high peak
- Contact:
sean they do a 700 litre one = 1.2 tons the 16 ton will lift that all day long, will lift a full pack of bricks and grab at full extension.
to steep for a conveyour, and as dan says family arent going to want us and i dont want to be tramping through the house, think its going to be the bucket skip
those cranes look ace but why when youve got an 80k digger sat around buy something else hehe, i know not normally my logic lol
Edited By GB_Groundworks on 1321039879
to steep for a conveyour, and as dan says family arent going to want us and i dont want to be tramping through the house, think its going to be the bucket skip
those cranes look ace but why when youve got an 80k digger sat around buy something else hehe, i know not normally my logic lol
Edited By GB_Groundworks on 1321039879
Giles
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
-
- Site Admin
- Posts: 4420
- Joined: Sat Aug 09, 2008 3:55 pm
- Location: high peak
- Contact:
not when you are pricing by the tonparishpaver wrote:I thought bulking only applied to volume, not weight, Giles?
2 tons is 2 tons surely?
Giles
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
-
- Posts: 952
- Joined: Mon Oct 30, 2006 8:24 pm
- Location: Bournemouth, Dorset
-
- Posts: 1328
- Joined: Thu Mar 26, 2009 9:00 am
- Location: Warwickshire
- Contact:
Mikey_C wrote:what about welding four hooks or bars on a bucket, so you can pick up filled ton/dumpy bags. 4 lantern irons holds the bag open while you fill it with the small digger. its bagged up ready to chuck on flat bed. i've had dumpy bags delivered by grab trucks with these on before.
Sound like the solution ,or you can use the 4 brothers to just hook straight onto the bag, short 1/2 metre chain would do it. Nice and tidy with one one handling . Rather than load/tip/load again
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Site Admin
- Posts: 4713
- Joined: Mon Jun 26, 2006 11:01 am
- Location: eastbourne
-
- Posts: 1328
- Joined: Thu Mar 26, 2009 9:00 am
- Location: Warwickshire
- Contact:
Like THIS?seanandruby wrote:.......That's what i was on about DN, we use them when doing headings for drainage underground.
You could always overkill and go for a diaphragm wall excavation grab, now there is a tool, amazing. :laugh: :;):
Interesting as you negate the need for shuttering etc
-
- Site Admin
- Posts: 4713
- Joined: Mon Jun 26, 2006 11:01 am
- Location: eastbourne
It's a great system, used to be popular years ago and is making a big come back. You can do the whole building top down, doing each floor as you reach it. The reinforcing is rebated where the floors will be and lowered in, as you dig down, you just strike the box out and you have a rebate all ready in situ. We're doing 3 lower floors on this one.
sean
-
- Posts: 1405
- Joined: Thu Sep 27, 2007 10:29 am
- Location: South Wales
- Contact:
-
- Site Admin
- Posts: 4713
- Joined: Mon Jun 26, 2006 11:01 am
- Location: eastbourne