Driveway thoughts - Marshalls tegula circle

All forms of block paving, brick paving, flexible or rigid, concrete or clays, new construction or renovation
Post Reply
abamlugz
Posts: 2
Joined: Fri May 20, 2011 1:25 am
Location: Dartford

Post: # 63723Post abamlugz

Hi there,

I am thinking of laying a Marshalls Tegula Circle Kit and then by continuing to extend the circle with small and medium tegula blocks. I am looking at using Hazelnut for the bulk and then pennant grey for the edging, with beds either side.

After speaking to Marshalls they suggest that I continue with 2 "rows" of small followed by 2 rows of medium and then I can do whatever I pattern thereafter.

I cannot seem to find this layout anywhere and was wondering if this might be easy to lay and get peoples thoughts on this. By the way our driveway is 25m2.

Thanks,

Adam

mickg
Posts: 2598
Joined: Wed Apr 08, 2009 8:01 am
Location: Peoples Republic of Westhoughton
Contact:

Post: # 63747Post mickg

You wont't find this layout as you would construct this laying pattern as required on site
Crystalclear
Driveway and Patio Installer

Call us today
01942 840109
7 days a week 8am till 8pm

Driveways Patios and Paving Specialists
Driveways

GB_Groundworks
Site Admin
Posts: 4420
Joined: Sat Aug 09, 2008 3:55 pm
Location: high peak
Contact:

Post: # 63749Post GB_Groundworks

Nice to see you again Mick you've been missed
Giles

Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.

http://www.gbgroundworks.com

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 63752Post lutonlagerlout

yay mickg is back!
WB mick
LLL :)
"what,you want paying today??"

YOUR TEXT GOES HERE

abamlugz
Posts: 2
Joined: Fri May 20, 2011 1:25 am
Location: Dartford

Post: # 63759Post abamlugz

Mick,

Thanks for this.

I'm currently thinking of using just the small and medium blocks. My concern would be that using the large blocks would cause wider joints then necessary. Or will it be fine using a mixture of the three sizes.

Thanks,

A

specialbranch
Posts: 99
Joined: Tue Nov 08, 2005 8:50 pm
Location: Birstall WEST YORKSHIRE
Contact:

Post: # 63782Post specialbranch

If the job is only 25m2 in total I dont think you will get to a radius that will need large blocks, as you say it will lead to some big joints

Post Reply