Edging - Space efficient edging for block paving

All forms of block paving, brick paving, flexible or rigid, concrete or clays, new construction or renovation
Post Reply
Wqtnomore
Posts: 1
Joined: Thu Oct 21, 2004 12:28 pm
Location: Thatcham, Berks

Post: # 6257Post Wqtnomore

My neighbour and I have (almost a year ago) embarked on applying for a dropped kerb. We have now at last been given permission. We will share a double access (rear of property) with our existing fence dividing the available parking area. I indent to install block paving.
Can anyone recommend a type of edging for my block paving which will allow me to get as close as possible to the fence. I’m concerned that it should be quite substantial as the drive will be taking the static weight of one car almost permanently. Haunched precast concrete edging seems to take up quite a bit of room.
In addition, I would be interested to know what type of edging would be suitable as a transition from block paving to patio slabs, carpet stones or similar.
Suggestions welcome please.

Tony McC
Site Admin
Posts: 8346
Joined: Mon Jul 05, 2004 7:27 pm
Location: Warrington, People's Republic of South Lancashire
Contact:

Post: # 6264Post Tony McC

Just use a standard block edge course, laid on and haunched with concrete. No need for a separate edging kerb, they never look right, anyway.

Using a concrete haunched edge course you can get to within 50mm of the fence, and then top dress the edging with gravel or, if you must, bring the haunching flush with the top of the edge course blocks and float finish it. If you use a coloured granolithic mortar for the top 20mm or so of the haunching, this can look "not too bad".
Site Agent - Pavingexpert

Post Reply