Hi,
I am renovating an old out house and am in the proccess of connecting the sewarage pipe for the toilet. The new branch is going into a hepworth IC. I have dug the trench and removed the green stopper (says supersleve on it) from the IC. When I put the 110mm plastic pipe into the IC the fitting doesnt seem very snug. Is there suppose to be an adoptor for the plastic pipe as the green stopper appears a little larger than that 110mm plastic pipe. The existing pipes in the ic chamber are 110 plastic.
Plan was to dig out and get ready for building inspector on tuesday.
Cheers.
Jon
Connecting to ic
-
digerjones
- Posts: 889
- Joined: Fri Jan 18, 2008 9:32 pm
- Location: cheshire
-
GB_Groundworks
- Site Admin
- Posts: 4420
- Joined: Sat Aug 09, 2008 3:55 pm
- Location: high peak
- Contact:
yep they are designed for vitrous clay pipe, any decent builders merchant will have them. you get enough for each outlet when you buy the base but guess the contractors took them away
Giles
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com