Road planings for drive - Re-doing old gravel drive
-
- Posts: 37
- Joined: Fri Apr 05, 2002 10:56 pm
- Location: Malvern
I am planning on sorting our drive out this year. It’s 300 foot long and with a steepish incline. I originally put gravel down but due to the Highland weather most of the fines have washed out leaving us with a “beach� at the bottom. I need to use something which will last better so I have been searching the web for ideas. As we live in a very rural area we don’t want something which looks too out of place.
I have seen several forums where the use of road planings has been used with a high degree of success. The main thing I have seen is that once the plainings are down and rolled. A light spray of diesel is used which softens the asphalt and then it is rolled again to compact it. Has anyone done this and if so what were the results?
Thanks in advance.
I have seen several forums where the use of road planings has been used with a high degree of success. The main thing I have seen is that once the plainings are down and rolled. A light spray of diesel is used which softens the asphalt and then it is rolled again to compact it. Has anyone done this and if so what were the results?
Thanks in advance.
Andyfr
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
we have always been taught never to use road planings
however if you live in somewhere like that with heavy weather it may work
I know various agencies (balfour beatty) spring to mind that reheat and reuse road planings
the diesel definitely breaks down tarmac
i suppose cost is a massive factor
concrete or bitmac would be better but with 100m by 3m , that could cost around 15 grand
the choice is yours andyfr but we cannot endorse it
let us know how you get on
pictures please
LLL
however if you live in somewhere like that with heavy weather it may work
I know various agencies (balfour beatty) spring to mind that reheat and reuse road planings
the diesel definitely breaks down tarmac
i suppose cost is a massive factor
concrete or bitmac would be better but with 100m by 3m , that could cost around 15 grand
the choice is yours andyfr but we cannot endorse it
let us know how you get on
pictures please
LLL
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
Unless you are lucky to get some fresh sticky planings your plan is flawed.
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
- Posts: 1990
- Joined: Sun Mar 25, 2007 10:49 pm
- Location: N/Ireland
-
- Posts: 37
- Joined: Fri Apr 05, 2002 10:56 pm
- Location: Malvern
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Site Admin
- Posts: 4713
- Joined: Mon Jun 26, 2006 11:01 am
- Location: eastbourne
-
- Site Admin
- Posts: 4420
- Joined: Sat Aug 09, 2008 3:55 pm
- Location: high peak
- Contact:
The diesel myth is a load of bollocks, we use plainings for farm tracks field gateways etc it's one of those urban myths that's spread by I'll informed morons. Simply lay and roll well and it'll last a bit but if you have heavy rain run off it won't last.
Also your open yourself up to a huge fine, all diesel tanks have to be bunded and your talking about spraying it on the rd to be washed into the surround soil to kill everything. Hello environment agency and a 50k fine
Have a look in the Craig there's a thread of mine last few weeks in pictures we laid a plainings carpark few weeks ago. You'll see what results you get, about page 16 ish I think
Edited By GB_Groundworks on 1303471085
Also your open yourself up to a huge fine, all diesel tanks have to be bunded and your talking about spraying it on the rd to be washed into the surround soil to kill everything. Hello environment agency and a 50k fine
Have a look in the Craig there's a thread of mine last few weeks in pictures we laid a plainings carpark few weeks ago. You'll see what results you get, about page 16 ish I think
Edited By GB_Groundworks on 1303471085
Giles
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
-
- Site Admin
- Posts: 1854
- Joined: Tue Aug 19, 2008 7:03 pm
- Location: kings lynn norfolk
- Contact:
myself and other contractors in norfolk have laid miles of farm tracks light roads with plainings ,slow rolling with small overlaps slow as you can go full vibe you will have no problems at all,over time they will firm up on top, never use diesel,norfolk council highways dpt. regually use them on new work,in 15 years of using them ive never had any comebacks. MSH
paving, mini-crusher, mini-digger hire and groundwork
http://mshpaving.co.uk
http://mshpaving.co.uk
-
- Site Admin
- Posts: 4420
- Joined: Sat Aug 09, 2008 3:55 pm
- Location: high peak
- Contact:
what you running up it? just cars or trucks tractors etc? we normally use 70-100mm to blind 200mm of brick hardcore
Giles
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com