Just pricing an 87m set job using the big buggers trying to work out the jointing. romex I've done, now investigating easipoint
Anyone know the coverage for setts roughly 20-30mm joint width 50-70 depth.
Typicall unit size 250x150 average
And what does it cost per bag? thinking black colour and how much can you fire in a day and joint?
Read the data sheets but not much info
Any other suggestions gents? Pitch or cement slurry then intense clean?
Easipoint do settpoint which is a slurry type mortar poured in out of a can? Anyone used it?
Edited By GB_Groundworks on 1299018149
Setts
-
GB_Groundworks
- Site Admin
- Posts: 4420
- Joined: Sat Aug 09, 2008 3:55 pm
- Location: high peak
- Contact:
Giles
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
-
lutonlagerlout
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
GB_Groundworks
- Site Admin
- Posts: 4420
- Joined: Sat Aug 09, 2008 3:55 pm
- Location: high peak
- Contact:
i was texting him a lot hehe but hed gome to bed but got a reply this am 
mr cookie is the boyo shame about us kicking their bum at rugby
Edited By GB_Groundworks on 1299104465
mr cookie is the boyo shame about us kicking their bum at rugby Edited By GB_Groundworks on 1299104465
Giles
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
-
ilovesettsonmondays
- Posts: 1071
- Joined: Sat Aug 22, 2009 8:57 pm
- Location: essex
we used easipoint granotech for slurry pointing our setts in the west end .its basically mix with a paddle pour on . squeegy all around and then squeegy as much of it off as possible . spraying a fine mist on setts . then use belt cleaner on setts . sponge edges belt cleaner cant get . the guys used to do about 30 m a day . this stuff goes off like iron . buses etc have no effect on it .