Recent work

[GB_Groundworks]

i knew you would make it good but wondered if you'd redo the whole thing

haha we have some steel plates 15mm thick about 450 wide x 1000 we use for covering ic etc or acco when running plant or wagons over.

[lutonlagerlout]

no, we will just make good
i took 15 photos before we started as it has been well abused and we wont be repairing stuff others have done
its a council owned road and we are working direct for the council so its up to them,the way the money is, it will probably be made good
TBh not much of a road ,but thats all they have for the close
LLL

[lutonlagerlout]

8 am this morning



9.30 am


10 am




10.45 (bored yet?)



12.00 after tea break


2.45 get in the pick up lads


all in all not a bad weeks work considering i was at a funeral yestarday,nice site and plenty of tea makes the lout a happy man

cheers LLL

[henpecked]

Nice work, LLL.

Did you rebar the slab?
Just wondering if it made a difference in domestic or not?

Hp

[dig dug dan]

apologies for being thick, but how do you know exactly where to put the sewer pipe tony, or more precisely, the 90' bend inside the extension?

[Dave_L]

"LLL closes eyes and plonks finger in random area within slab"

[lutonlagerlout]

no rebar hen
just st4 concrete which the driver informed me is the same mix as they are using on the motorway = C30

we have detailed plans dan once the footprint is up ,its a simple task to measure off 2 walls

it is a wet room type construction at the end closest to the road ,so we have to use a harmer gully and altro flooring

LLL

[dig dug dan]

I thought that was the case tony!!

[flowjoe]

Master Class Tony, you should set up a time lapse camera and put the lot on you tube.

Not forgetting to cut out the bit where your scratching your arse with your trowel and juggling your nuts ???

[lutonlagerlout]

for some reason the lads get all camera shy
summat to do with crime stoppers :;):
LLL

[flowjoe]

:;): :;): ???

[seanandruby]

got a spare blucher gully if your interested lll

[lutonlagerlout]

LLL

[lutonlagerlout]

photie links CBA to do them individual but used the gunpoint from instarmac
the bag was 5kg smaller than easipoint but overall i would rate them the same to use
20kg of gun point did exactly 2M2 of brickwork albeit with very big perpends and beds and raked out to 25mm

so if estimating for BWK i would allow 10kg of pointing mix per metre squared

cheers
LLL

[mickg]

why have you got the open joints Luton, you still using Putlock scaffold in your neck of the woods ? ???