Slab casting

Other groundworks tasks, such as roads and footpaths, terracing, fencing, foundations, walls and brickwork, tools and plant.
henpecked
Posts: 1328
Joined: Thu Mar 26, 2009 9:00 am
Location: Warwickshire
Contact:

Post: # 52480Post henpecked

Right, a bit perplexed here. :(

Got a couple of weeks off work to cast a slab. I was going to use a C20 mix (garage base) but would a C25 or even 30 be justifiable?
The slab finishes with build up MOT (roughly 150mm) above ground. Would it be best to build 2 brick course to retain this, or shutter past the MOT (2" or so) so the edge finishes in concrete?

Also, the edge on one side has concrete gravel boards, would these be OK to retain 150mm of concrete or would shuttering be best practice ?

And finally can fibre replace rebar mesh on 150mm?

Phew, out of breath now :p

Hp

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 52488Post lutonlagerlout

a stronger mix doesn't cost much more
think its about £10 per metre extra for C30 as opposed to C20,the bulk of the money is haulage
if you concrete to the gravel boards you would have a job replacing them,however you are moving soonish IIRC
LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

henpecked
Posts: 1328
Joined: Thu Mar 26, 2009 9:00 am
Location: Warwickshire
Contact:

Post: # 52501Post henpecked

Looks like Aus is off the list, kids wont go :angry: Hence casting slab.

What about the fibres? would it be ok to just have fibres and no rebar in a 150 slab of C30?

Hp

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 52513Post lutonlagerlout

my mate went to melbourne about 5 years ago and him and his kids hated it
he got a start painting and his first job was 80 miles outside melbourne!!!
thats a daily commute apparently
anyway the eldest son refused to go to school anymore so they came back after a year

this is a slab for a shed right?
sounds like overkill hen

LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

henpecked
Posts: 1328
Joined: Thu Mar 26, 2009 9:00 am
Location: Warwickshire
Contact:

Post: # 52525Post henpecked

Well, yes.......and no.

The shed was a comprimise to my all singing/dancing garage. So the shed has been oredered, but Im looking at upgrading the base, as if we are actually staying, I will flog the shed in near future and build my cathedral of timber. :D

So will the fibre be a feasible alternative to re-bar with C30?

Hp

GB_Groundworks
Site Admin
Posts: 4420
Joined: Sat Aug 09, 2008 3:55 pm
Location: high peak
Contact:

Post: # 52526Post GB_Groundworks

will you be running cars on it and what size shed could you get a heavy 4x4 in etc

id so then stick a single layer of mesh overlapped 2 squares if more than 2 sheets, we always tie then together with seel fixing wire but its over kill for a small slab.

fibres ok for light duty and prevent plastic cracking
Giles

Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.

http://www.gbgroundworks.com

henpecked
Posts: 1328
Joined: Thu Mar 26, 2009 9:00 am
Location: Warwickshire
Contact:

Post: # 52527Post henpecked

Ta GB

It wont be used for heavy duty stuff, maybe a gym at best.

Hp

PS it will be a 6 x 3 m slab @ 150mm

henpecked
Posts: 1328
Joined: Thu Mar 26, 2009 9:00 am
Location: Warwickshire
Contact:

Post: # 52619Post henpecked

Right, done footings and hardcore.

So far the sub-layer contains:

Ibstock bricks (Leicester)
Travertine (Turkey)
Marble (Italy)
Sandstone (India)

What you think Time team will make of that one in 200 years ?


:D :D :D

will be topping off with MOT. Broke all bricks etc up by hand (to 80mm ish) got rid o all sh1t in garden (for jobs I might need, but never did :laugh: )
Still ,my CIOB training wouldnt let me bury the blocks, so Im keeping them for......

you get the idea :)

On-wards and up-wards!

Hp

Ps got barrow gang coming Tues am. There barrowing C30 4 cube for £550 inc fibres. Took care of access problems ;)

seanandruby
Site Admin
Posts: 4713
Joined: Mon Jun 26, 2006 11:01 am
Location: eastbourne

Post: # 52621Post seanandruby

put fibre board, or something along gravel board.
sean

henpecked
Posts: 1328
Joined: Thu Mar 26, 2009 9:00 am
Location: Warwickshire
Contact:

Post: # 52622Post henpecked

seanandruby wrote:put fibre board, or something along gravel board.

Ta, I have some 9x3 floor joists Im going to lean up against the fence. 6 mtrs each, should do the job :;):
Again, for a job i was....etc etc :laugh:

Hp

PS

did think the DPM would take care of any 'adhesion' issues anyway

Mikey_C
Posts: 952
Joined: Mon Oct 30, 2006 8:24 pm
Location: Bournemouth, Dorset

Post: # 52703Post Mikey_C

henpecked wrote:Looks like Aus is off the list, kids wont go

bonus, be even nicer over there, if there over here

henpecked
Posts: 1328
Joined: Thu Mar 26, 2009 9:00 am
Location: Warwickshire
Contact:

Post: # 52726Post henpecked

Mikey_C wrote:
henpecked wrote:Looks like Aus is off the list, kids wont go

bonus, be even nicer over there, if there over here
Lol, Yes it was suggested, we implied Katie could stay with her nan and come over after her exams..... didn't work, just as stubborn as her mam. :D
Still applying for Visas, just take our time now, maybe in 3-5 years, maybe not, see what happens.

Hp

henpecked
Posts: 1328
Joined: Thu Mar 26, 2009 9:00 am
Location: Warwickshire
Contact:

Post: # 52774Post henpecked

Image

Well this is how far I've got, on me jack. Everyone either on holiday or bone idle :D

Slab will go up to the gate/fence bit which is being replaced with double teak doors.
Theres a bit prepped outside the gate for a parking slab to join the main garage base (gully in-between to prevent cracks)
Great work out, dont think I could have got as much pain down the gym :laugh:

Hp

henpecked
Posts: 1328
Joined: Thu Mar 26, 2009 9:00 am
Location: Warwickshire
Contact:

Post: # 52956Post henpecked

Well, all done finally.........

Image

Just a question about rain.

The slab is covered and troweled before it started to rain, some small patches have separated from the cement (due to water).
Could I used some cement powder to bind the sand back to the surface tomorrow?


Didn't want to go down the painting route or knocking off the top layer and rescreeding.

Hp

henpecked
Posts: 1328
Joined: Thu Mar 26, 2009 9:00 am
Location: Warwickshire
Contact:

Post: # 53128Post henpecked

Forget the last question. The rain battered the surface a bit, but now its dried out, not too bad a finish :cool:
Just brushed off excess sand and cement, looks the dogs dangalies ,shed Tuesday, will be built up whilst Im at work, then the wife can start sending the dinners up the garden :laugh:

Hp

Post Reply