Circular path with setts - What do i lay them with and what pattern

[bloody useless]

I am making a path around a lawn 9m in diameter. The path is 075m wide. I have (or am in the middle of ) put a concrete base down and am going to use 100mm X 100mm black limestone cobbles. Could anyone tell me

1. What should I lay them with? Should I use stone dust and if so what mix?

2. What pattern should I use or will the gap widening as it gets farther away from the center not show

3. Where is the cheapest place to get black limestone setts?

[cookiewales]

I am making a path around a lawn 9m in diameter. The path is 075m wide. I have (or am in the middle of ) put a concrete base down and am going to use 100mm X 100mm black limestone cobbles. Could anyone tell me

1. What should I lay them with? Should I use stone dust and if so what mix?

2. What pattern should I use or will the gap widening as it gets farther away from the center not show

3. Where is the cheapest place to get black limestone setts?

limestone setts not good for outside unless sealed go for reclaimed sets or indian sandstone sets good luck cookie :;):

[lutonlagerlout]

seek and ye shall find
regards LLL

[ilovesettsonmondays]

www.kwikkerb.co.uk

[lutonlagerlout]

please send me a no obligation information pack NOW! for kwikkurb so i can drive around in a snazzy red uniform with everything colour coordinated in a snazzy carmine red!
and hopefully after many years of practise i can talk like the guy from the rugmaster advert on QVC


joking aside i am sure a few years back we had a regular poster who had a kerbing machine and there wasnt much call for it
LLL

[msh paving]

10 years ago i went to the kwick kerb franchise doo in norwich norfolk, £15000 for the kit,i never went for it, been trying to buy a extruder but they make over a thousand pounds on ebay 1-2 times a year, MSH

[ilovesettsonmondays]

thinkyou will be better with a subway franchise lll

[ilovesettsonmondays]

to match
green hat :p

[lutonlagerlout]

i had a mate who went to all those franchise events
maccy-d's wanted about a quarter mill up front with a further QM later :O
He got a dyno lock one instead :;):
i think with PIC it might look good ,but not so great with CBP
LLL

[msh paving]

I was looking at it as sideline around flower borders and gravel drives, but machine is to over priced MSH