Flexible or rigid block paving for a garden path?

All forms of block paving, brick paving, flexible or rigid, concrete or clays, new construction or renovation
Triggaaar
Posts: 33
Joined: Fri Mar 12, 2010 9:58 am
Location: Sussex

Post: # 48090Post Triggaaar

lutonlagerlout wrote:looks great,you need to haunch the edges,grass wont hold anything
if you haunch to within 25 mm of the top of the brick then you can add some KDS and a stabiliser

Thanks, sounds like a plan. I know as much about turf as I do about paving and I wasn't sure if putting mortar close to the grass surface would effect the grass, but I'll try and add enough to hold the bricks. I was hoping KDS would be enough, thanks for re-assuring me.

What's a stabiliser?

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 48091Post lutonlagerlout

you should have really haunched it as you went so that the haunching is part of the bedding
nonetheless haunching it after is better than nowt
some people like a stabiliser to stop the kds migrating,I have never used it but some of the blokes on here swear by it
btw what bricks are those? and are they f1 or f2?
LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 48097Post Dave_L

F1 or F2???

Wossatt?? I know about F1 though!

:rock:
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

Triggaaar
Posts: 33
Joined: Fri Mar 12, 2010 9:58 am
Location: Sussex

Post: # 48098Post Triggaaar

lutonlagerlout wrote:you should have really haunched it as you went so that the haunching is part of the bedding

Yes I should have - unfortunately the garden is higher in the middle than at the ends so I ended up digging pretty deep and didn't make the dig as wide as I might have (massive amounts of soil to take down a thin side path to skip).

I don't know what f1 or f2 is. They're a local stock brick. They also make a paver which is the same except 200x100x50 instead of 215ish x100x65.

Thank you for your help, I appreciate it.

irishpaving
Posts: 420
Joined: Mon Jun 29, 2009 11:14 pm
Location: uk

Post: # 48100Post irishpaving

F1 and F2. Tony is asking if they are frost resistant i think... Why didn't you use a proper brick paver or are you going for costs. I do like the layout and looks good and even... WD :)
"I'm spending a year dead for tax reasons."

Triggaaar
Posts: 33
Joined: Fri Mar 12, 2010 9:58 am
Location: Sussex

Post: # 48102Post Triggaaar

irishpaving wrote:Why didn't you use a proper brick paver or are you going for costs.
The problem was that the brick pavers are available in 450 packs and I needed about 1000. They are also a lot more expensive per brick, and the supplier told me they were no stronger etc, just a different size. Since I was only doing a straight bond, I thought I'd get away with the std brick.
I do like the layout and looks good and even... WD :)
Thank you. Not totally even, I've tried to line them up but all the bricks are slightly different sizes and not perfectly square, so it's a bit tricky. I'll post some more pics later, but I'm concentrating on the slabs now.

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 48105Post lutonlagerlout

f1 and f2 are frost resistant bricks,anything else is no good outdoors
personally i like the look of certain housebricks in pedestrian paths better than pavers,I like to butter them and lay them as i go ,it makes an interesting feature albeit slow
LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

Post Reply