Unemployment - Its heading my way

General banter, tradesmen, recommendations and warnings, surplus materials, humour and owt else!
Post Reply
bobbi o
Posts: 481
Joined: Wed Aug 17, 2005 11:55 pm
Location: glasgow

Post: # 40359Post bobbi o

dig dug dan wrote:Ifor williams do not make a trailer bigger than 3.5t gross, so unless the disco weighs 4.5 tonne, its not possible!
forget the weight of the disco,i'm talking a 6t load on an iforwilliams trailer with greedy boards-no problemo.

Injured
Posts: 348
Joined: Sun Feb 24, 2008 8:34 pm
Location: Widnes
Contact:

Post: # 40360Post Injured

mine is the old type 300tdi

got what i could afford but would have preferred a TD5

If you use it for towing commercially as it is a domestic car not a commercial vehicle you dont need a tacho.
The hire company I use for mini digger has a disco 3 and uses that for towing machine so they dont have to put tachos on their wagons.
http://www.bigdiggroundworks.co.uk

Patios and Drives Cheshire

dig dug dan
Posts: 2504
Joined: Thu Jul 10, 2003 10:20 pm
Location: hemel hempstead,herts. 01442 212315

Post: # 40361Post dig dug dan

.
The hire company I use for mini digger has a disco 3 and uses that for towing machine so they dont have to put tachos on their wagons.


They still need one in the disco i'm afraid. The tacho rule is one i studied extensively after being pulled over on the M11 for an hour to prove if i did or did not require one.
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"

Suggers
Posts: 934
Joined: Tue Nov 01, 2005 10:57 pm
Location: Buckinghamshire
Contact:

Post: # 40380Post Suggers

I'm with the "run it til it dies brigade"
Had this darling from 3 mths old in 1987 - pulls like a train - only done 75,000 - been to the mountains a couple of times.

Image

Suddenly, bodywork starting to go home - some serious welding needed for next mot. (You see loads of these old Patrols going strong in the mountains - must be the lack of humidity thing on the bodywork?)
"Meet the new boss - same as the old boss - We all get fooled again"

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 40385Post Dave_L

I'm sure the max towing weight of the Disco is 3500kg - trailer+load.

Check out this table Discovery 2001 Towing Weights
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

msh paving
Site Admin
Posts: 1854
Joined: Tue Aug 19, 2008 7:03 pm
Location: kings lynn norfolk
Contact:

Post: # 40386Post msh paving

Injured wrote:mine is the old type 300tdi

got what i could afford but would have preferred a TD5

If you use it for towing commercially as it is a domestic car not a commercial vehicle you dont need a tacho.
The hire company I use for mini digger has a disco 3 and uses that for towing machine so they dont have to put tachos on their wagons.
Dan is correct about the tacho, any vehicle over 3.5t gross train weight used for hire or reward needs one

if you get away with it all well and good, but the day will come, look in any travis perkins tool hire transits or cabstars, also speedy and hewden they all have tacho's

the only exemption is for private use such as a horse box,or towing a private trailer, any buisness use needs one,but you only need to put a disc in when trailer is being pulled,then your on lorry driving rules soon as trailer is off back to drive as you like

my mate has a classic wedding car buisness and had to fit a tacho in his land cruiser at a cost off £1000+vat,another local man had a 1.5t mini excavator behind his transit police made him take it off and get it collected because of no tacho,its a finable offence too

if VOSA pull you up you will not get away with it, MSH :)
paving, mini-crusher, mini-digger hire and groundwork
http://mshpaving.co.uk

msh paving
Site Admin
Posts: 1854
Joined: Tue Aug 19, 2008 7:03 pm
Location: kings lynn norfolk
Contact:

Post: # 40387Post msh paving

I have a disco p reg, there is no towing weight on the plate in engine compartment, all the spaces are left blank, I was told it could tow 3ton
but you cant tow and exceed 7.5 ton gross train weight anyway
because you then get into HGV thats why you cant tow a 3 ton mini digger,
mine has to go on the back off my 7.5 ton lorry and im just in weight mistsubushi canter can carry 3.8 ton :)

MSH :)
paving, mini-crusher, mini-digger hire and groundwork
http://mshpaving.co.uk

henpecked
Posts: 1328
Joined: Thu Mar 26, 2009 9:00 am
Location: Warwickshire
Contact:

Post: # 40388Post henpecked

Put that under 'I didnt know that yesterday'


Well. Ive got a Mitsubishi GTO in red twin turbo 1000 brake HKS turbos front and back pushing 500 hp on dyno. Got a straight manual GTO in silver non-turbo. An MGBGT 1977. Renault Kangoo for work. The Kangoo is pants really, too big for what it is and with a 1.9 engine just about 40 to the gallon :(
Speaking of unemployment, has anyone noticed an upturn? I had the phone ringing off the hook Friday for new work all for a Monday start.



:D :D :D :D

Happy days are here again!

Hp

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 40389Post Dave_L

Best we have some pics of your GTO's HP, some shiny engine shots pls!
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

henpecked
Posts: 1328
Joined: Thu Mar 26, 2009 9:00 am
Location: Warwickshire
Contact:

Post: # 40396Post henpecked

Just got back from the allotment, glad to oblige.

Image


Sorry Dave, I dont do shiny :( .Benn meaning to bling the bay up for a while now, but never get round to it :;):

You can see the 18 lb waste gate at the front (above the turbo)


Image

My bit of weekend fun, when I can fit it in.

Hp

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 40404Post lutonlagerlout

what is that link in your sig HP?
are you a bit like steven segal?
I too was over the allotment today from 11 till 6, its breaking my heart, the mice, slugs, disease,you name it we got it over there
had the onions out this weekend and main crop coming soon
and a few cabbages :)
LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

rab1
Posts: 1869
Joined: Sun Jun 07, 2009 10:19 pm
Location: scotland

Post: # 40407Post rab1

Dan & MSH are correct on the tachos and believe me if your caught your cussed, one of our drivers filled his out incorrectly and was stopped by the police, £1500 fine, 6 points same with overloading, min 4 figure fine plus points as these laws are designed for HGV`s. the police`s latest one is to pull over maintenance vans are they normally have shelves and lock boxes etc, that add a hell of a lot of weight to your standered van.
God loves a tryer

henpecked
Posts: 1328
Joined: Thu Mar 26, 2009 9:00 am
Location: Warwickshire
Contact:

Post: # 40408Post henpecked

lutonlagerlout wrote:what is that link in your sig HP?
are you a bit like steven segal?

Lol. Yes I am as a matter of fact ...a fat with black hair :laugh: :laugh:

Used to do the door a while ago, the guys on there are trying to recruit new bods on the site ,so I thought I'd give you orrible lot a go.

The allotment wont be ready till next year, just got it last month and its over grown with grass etc.
So just turning it and laying a few slabs for access.

WIP (work in progress)


:)

Hp

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 40410Post lutonlagerlout

whatever you do me do not rotavate weeds in to it, it will be full of wireworm if its got grass now,you need jeyes fluid to kill them off
and as much manure as you can get
cheers LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

Stuarty
Posts: 637
Joined: Sat Mar 18, 2006 7:35 pm
Location: Edinburgh

Post: # 40503Post Stuarty

speaking of towing and tachos, the work have me a VW Transporter, mwb pulling a 2.7t ifor trailer. the vans have been pulled a few times, from vosa and traffic alike, and never mentioned anything about tachos so im told. so i take it im in the firing line for the fine and points for the firm not fitting them to the motor?

Post Reply