Travertine around pool in uk - Travertine around pool in uk

Patio flagstones (slabs), concrete flags, stone flags including yorkstone and imported flagstones.
Post Reply
Spotvega
Posts: 3
Joined: Wed Jul 22, 2009 7:24 pm
Location: UK

Post: # 40007Post Spotvega

???

Hi All

Having read the main website, I know I'm already going to be unpopular in my choice of TUMBLED TRAVERTINE to go round my pool in the UK. That having been said, we do live on the Sunny South Coast and my house is white so I think we'll just need to stay on top of some of the issues.

Anyway: I think I'm going to be laying the stones butt-jointed around the pool and at present we have a concrete base.

The stone's supplier says we should lay the stones directly onto mortar.

My builder wonders whether we should use an adhesive of some sort.

Someone else has mentioned using white cement.

Three hours ago - I didn't know ANY of these words! :D So please speak as if to an idiot (which I clearly am apparently with my travertine).

My question is: I've got a concrete base. I've got 140m2 of travertine. What should go between them? I do not want to see grey joins and I do not know whether I should be considering what to do about waterproofing/sealing etc.

Any pointers from you guys?

Thanks

Tom

irishpaving
Posts: 420
Joined: Mon Jun 29, 2009 11:14 pm
Location: uk

Post: # 40011Post irishpaving

been a concrete slab my pref wud be wet set, no joints, sealer
"I'm spending a year dead for tax reasons."

Spotvega
Posts: 3
Joined: Wed Jul 22, 2009 7:24 pm
Location: UK

Post: # 40018Post Spotvega

Hey thanks for answering. I have a few questions (being very new to this).

Being a concrete slab - the Travertine is natural not concrete. Does this make a difference?

Wet set = does this mean mortar base on concrete?

No joints = butt-jointed?

Sealer = what does that do? is it like something which forms a protective coating over the whole area?

Thanks

Tom

henpecked
Posts: 1328
Joined: Thu Mar 26, 2009 9:00 am
Location: Warwickshire
Contact:

Post: # 40027Post henpecked

Hi

1, No
2, Yes
3,Yes
4, Seals the surface :D . Travertine is notorious for Algae growth in the UK due to our humid climate (did you notice I let out 'warm' ?) So it will need some type of seal, so your not out every other weekend with the jet washer. Bit slippery too :(

Hope this helps

Hp

Spotvega
Posts: 3
Joined: Wed Jul 22, 2009 7:24 pm
Location: UK

Post: # 40030Post Spotvega

Thanks HP and Irish.

SFLandscape
Posts: 36
Joined: Thu Sep 11, 2008 9:23 pm
Location: Southampton

Post: # 40069Post SFLandscape

Lay a lot of Travertine, you need to leave gaps , about 4 to 5 mm, then grout using a Limestone colour Grout then seal but use a good sealer like Lithofin or SealGuard . Your builder is right it is a good idea to use white cement just in case of bleeding though the slab, im also in the south coast and never had a problem with Travertine
sf

Pablo
Posts: 1990
Joined: Sun Mar 25, 2007 10:49 pm
Location: N/Ireland

Post: # 40072Post Pablo

If the concrete slab is true with good falls and control joints would it not be best to get a tiler to lay them using exterior adhesive and grout. I'm with SF tumbled paving like this shouldn't be butt jointed because the edges will hold water dirt and moss etc and get very manky.
Can't see it from my house

henpecked
Posts: 1328
Joined: Thu Mar 26, 2009 9:00 am
Location: Warwickshire
Contact:

Post: # 40073Post henpecked

Always thought but joints looked good on these, preference I suppose
:)

Hp

rimexboy
Posts: 916
Joined: Thu Aug 07, 2008 8:31 pm

Post: # 40077Post rimexboy

Pablo wrote:If the concrete slab is true with good falls and control joints would it not be best to get a tiler to lay them using exterior adhesive and grout. I'm with SF tumbled paving like this shouldn't be butt jointed because the edges will hold water dirt and moss etc and get very manky.
Im with pablo on this one i have to say

simon

Post Reply