Travertine around pool in uk - Travertine around pool in uk
-
- Posts: 3
- Joined: Wed Jul 22, 2009 7:24 pm
- Location: UK
???
Hi All
Having read the main website, I know I'm already going to be unpopular in my choice of TUMBLED TRAVERTINE to go round my pool in the UK. That having been said, we do live on the Sunny South Coast and my house is white so I think we'll just need to stay on top of some of the issues.
Anyway: I think I'm going to be laying the stones butt-jointed around the pool and at present we have a concrete base.
The stone's supplier says we should lay the stones directly onto mortar.
My builder wonders whether we should use an adhesive of some sort.
Someone else has mentioned using white cement.
Three hours ago - I didn't know ANY of these words! So please speak as if to an idiot (which I clearly am apparently with my travertine).
My question is: I've got a concrete base. I've got 140m2 of travertine. What should go between them? I do not want to see grey joins and I do not know whether I should be considering what to do about waterproofing/sealing etc.
Any pointers from you guys?
Thanks
Tom
Hi All
Having read the main website, I know I'm already going to be unpopular in my choice of TUMBLED TRAVERTINE to go round my pool in the UK. That having been said, we do live on the Sunny South Coast and my house is white so I think we'll just need to stay on top of some of the issues.
Anyway: I think I'm going to be laying the stones butt-jointed around the pool and at present we have a concrete base.
The stone's supplier says we should lay the stones directly onto mortar.
My builder wonders whether we should use an adhesive of some sort.
Someone else has mentioned using white cement.
Three hours ago - I didn't know ANY of these words! So please speak as if to an idiot (which I clearly am apparently with my travertine).
My question is: I've got a concrete base. I've got 140m2 of travertine. What should go between them? I do not want to see grey joins and I do not know whether I should be considering what to do about waterproofing/sealing etc.
Any pointers from you guys?
Thanks
Tom
-
- Posts: 420
- Joined: Mon Jun 29, 2009 11:14 pm
- Location: uk
-
- Posts: 3
- Joined: Wed Jul 22, 2009 7:24 pm
- Location: UK
Hey thanks for answering. I have a few questions (being very new to this).
Being a concrete slab - the Travertine is natural not concrete. Does this make a difference?
Wet set = does this mean mortar base on concrete?
No joints = butt-jointed?
Sealer = what does that do? is it like something which forms a protective coating over the whole area?
Thanks
Tom
Being a concrete slab - the Travertine is natural not concrete. Does this make a difference?
Wet set = does this mean mortar base on concrete?
No joints = butt-jointed?
Sealer = what does that do? is it like something which forms a protective coating over the whole area?
Thanks
Tom
-
- Posts: 1328
- Joined: Thu Mar 26, 2009 9:00 am
- Location: Warwickshire
- Contact:
-
- Posts: 36
- Joined: Thu Sep 11, 2008 9:23 pm
- Location: Southampton
Lay a lot of Travertine, you need to leave gaps , about 4 to 5 mm, then grout using a Limestone colour Grout then seal but use a good sealer like Lithofin or SealGuard . Your builder is right it is a good idea to use white cement just in case of bleeding though the slab, im also in the south coast and never had a problem with Travertine
sf
-
- Posts: 1990
- Joined: Sun Mar 25, 2007 10:49 pm
- Location: N/Ireland
If the concrete slab is true with good falls and control joints would it not be best to get a tiler to lay them using exterior adhesive and grout. I'm with SF tumbled paving like this shouldn't be butt jointed because the edges will hold water dirt and moss etc and get very manky.
Can't see it from my house
-
- Posts: 1328
- Joined: Thu Mar 26, 2009 9:00 am
- Location: Warwickshire
- Contact:
-
- Posts: 916
- Joined: Thu Aug 07, 2008 8:31 pm
Im with pablo on this one i have to sayPablo wrote:If the concrete slab is true with good falls and control joints would it not be best to get a tiler to lay them using exterior adhesive and grout. I'm with SF tumbled paving like this shouldn't be butt jointed because the edges will hold water dirt and moss etc and get very manky.
simon