Attractive linear drainage channels

Foul and surface water, private drains and public sewers, land drains and soakaways, filter drains and any other ways of getting rid of water.
Post Reply
hander
Posts: 6
Joined: Mon May 25, 2009 12:22 pm
Location: London

Post: # 38071Post hander

Hi,

First time poster - please be gentle!

I need to lay about 4m of linear drainage in front of some wooden patio doors (which open up the entire length).

It's light traffic only, and for a patio of about 25 sqm - so not large.

The trouble I'm having is finding anything that will look reasonable. I'm torn between SS finish and plastic but imagine the former might look a little smarter.

ANy suggestions?

I've looked at:
1 Flodrain - not sure if this will just oxidise and look cr*p after ten minutes.
2 Aco doorway drain - not sure why this has two different style grates - must be for a reason but looks overly fussy (um ... like me, at times)
3 Aco step drain - not sure if this is long enough or can be clipped together - it isn't clear.

Has anyone any direct experience of any of these or any others?

Basically, I just want something that looks good, does the job, and isn't overly complex to fit! Many thanks!

flowjoe
Posts: 1136
Joined: Sun May 08, 2005 9:25 am
Location: North West

Post: # 38073Post flowjoe

You can get the plastic channels in many colours, take a look at fernco. But it will look like plastic !

I prefer the composite channels with a black matt cast iron affect grating, they just blend in better and dont look all shiney and new.

Aco do them i think and there are a few links to suppliers on the main site
http://draindomain.com

Many paths can lead to riches, few in sunlight, some in ditches

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 38083Post Dave_L

Black iron topped channels - bit OTT for the loading they will carry but at least they can be painted with smooth hammerite etc.
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

msh paving
Site Admin
Posts: 1854
Joined: Tue Aug 19, 2008 7:03 pm
Location: kings lynn norfolk
Contact:

Post: # 38090Post msh paving

Iron grates will probilly double the cost of the aco channels,usually iron grates are used mainly in a heavy carpark area MSH :)
paving, mini-crusher, mini-digger hire and groundwork
http://mshpaving.co.uk

flowjoe
Posts: 1136
Joined: Sun May 08, 2005 9:25 am
Location: North West

Post: # 38094Post flowjoe

Totally agree with the two comments above, which is why i kind of stressed the `cast iron affect`i have seen light duty channels with thin grating that give this look.

The galvanised grates as with the plastic can stand out a bit untill weathered
http://draindomain.com

Many paths can lead to riches, few in sunlight, some in ditches

GB_Groundworks
Site Admin
Posts: 4420
Joined: Sat Aug 09, 2008 3:55 pm
Location: high peak
Contact:

Post: # 38096Post GB_Groundworks

i did a product test with the gaffer the other day and he was telling me about a job where they had cable tied a blue LED rope light to the underside of the grating to give an uplighting affect, tony said it looked the mutts nuts.
Giles

Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.

http://www.gbgroundworks.com

flowjoe
Posts: 1136
Joined: Sun May 08, 2005 9:25 am
Location: North West

Post: # 38097Post flowjoe

I can think of at least two jobs i have been on where the drainage system has been utilised as a duct for a cable, usually to save the drive being excavated.

Obvious safety issues, but suprisingly little affect on the performance of the drain.
http://draindomain.com

Many paths can lead to riches, few in sunlight, some in ditches

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 38101Post Dave_L

msh paving wrote:Iron grates will probilly double the cost of the aco channels,usually iron grates are used mainly in a heavy carpark area MSH :)
Yeah, I know that, but if the metreage for said drain wasn't too long then the costs wouldn't be too big a factor. The cast iron could be repainted annually etc and would look good.

Liking the idea of low voltage lighting in the channels!! :)
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

hander
Posts: 6
Joined: Mon May 25, 2009 12:22 pm
Location: London

Post: # 38120Post hander

Many thansk for you answers on this.

I called Aco and Aco doorway is intended to lie half under the cill and half exposed as a drain - hence the two different gratings. This would be perfect for me except that there will be about 60mm of channel lying under the cill which is much longer than distance I have between the front edge of the cill and the bricks at the bottom of the threshold.

Aco don't have any 'cast iron' effect stuff, they say.

Thanks again. Will keep looking.

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 38152Post lutonlagerlout

stainless steel looks smart and keeps its looks IME
LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

hander
Posts: 6
Joined: Mon May 25, 2009 12:22 pm
Location: London

Post: # 38166Post hander

Thanks. Any recommendation on a particular type?

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 38185Post lutonlagerlout

ACO

LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

Post Reply