What tool to dig - Restricted space
-
- Posts: 23
- Joined: Fri Aug 24, 2007 2:00 pm
- Location: sleaford
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
Are you sure you can't get a mirco in there?
Most will go through a 730mm opening........saves a lot of physical work!
Most will go through a 730mm opening........saves a lot of physical work!
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
- Posts: 64
- Joined: Mon Mar 16, 2009 10:45 pm
- Location: Huddersfield, West Yorkshire
- Contact:
Done something similar recentley and we were getting nowhere with a spade. Asked a mate and he said to buy a Mattock. It worked a treat. Still need a spade to move the stuff that been loosened, but for breaking stuff up, going through a few tree roots, its brilliant.
Wikipedia - Mattock
Wikipedia - Mattock
Regards,
Andy Willcock
Amogen Drive, Decking & Patio Cleaners
Premier Exterior Surface Cleaners & Restorers
FREE Quotes & FREE Demonstrations - Nationwide Coverage
Website
info@amogen.com
Est. 2004
Andy Willcock
Amogen Drive, Decking & Patio Cleaners
Premier Exterior Surface Cleaners & Restorers
FREE Quotes & FREE Demonstrations - Nationwide Coverage
Website
info@amogen.com
Est. 2004
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
Crikey, that's over 7 ton of dirt out!lutonlagerlout wrote:me and my m8 can dig a foundation trench 7 m long by .5m wide by 1m deep in a day using just a fork and a shovel
needs to be a heavy duty one though
LLL
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
Not really, but they can be a little jerky/erratic as they are so small - slight overswing if you are close to buildings etc could be expensive!!fredmila wrote:I'll go and double check. Is it difficult to learn to use?
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
- Site Admin
- Posts: 8346
- Joined: Mon Jul 05, 2004 7:27 pm
- Location: Warrington, People's Republic of South Lancashire
- Contact:
Pavingexpert - MattockAmogen wrote:Done something similar recentley and we were getting nowhere with a spade. Asked a mate and he said to buy a Mattock. It worked a treat. Still need a spade to move the stuff that been loosened, but for breaking stuff up, going through a few tree roots, its brilliant.
Wikipedia - Mattock
Site Agent - Pavingexpert
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
I like that page Tony - "Is it a spade or is it a shovel?"Tony McC wrote:Pavingexpert - Mattock
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
- Site Admin
- Posts: 1854
- Joined: Tue Aug 19, 2008 7:03 pm
- Location: kings lynn norfolk
- Contact:
myself i call a spade a spade...............lol MSH
paving, mini-crusher, mini-digger hire and groundwork
http://mshpaving.co.uk
http://mshpaving.co.uk
-
- Posts: 89
- Joined: Sat Oct 06, 2007 3:41 pm
- Location: Hyde, Cheshire
- Contact:
You could try to get hold of a decent long handled grafting spade, I use to work for BT and we called them rabbiters, we use them and post hole diggers for putting telephone poles in.
The one I've (still) got has a 15" blade and 6ft long steel shaft and it will chop straight through a brick (and your foot if your not careful) :p
Darren
The one I've (still) got has a 15" blade and 6ft long steel shaft and it will chop straight through a brick (and your foot if your not careful) :p
Darren
What do you mean you've changed your mind, i've already started !
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
i never use the mattock for digging (got bollocked for that as a lad) its always fork or pick,with the lad backing me up on the shovel, and a 6 yd skip a day is our benchmark for 2 men although i have done more and less depending on the ground etc
some plonker i know in brum tried to impress me telling me that him and his m8 dug a trench46m long by 600mm wide and 1.8m deep in a day
lol
LLL
some plonker i know in brum tried to impress me telling me that him and his m8 dug a trench46m long by 600mm wide and 1.8m deep in a day
lol
LLL
-
- Posts: 345
- Joined: Tue Aug 07, 2007 9:23 pm
- Location: Hereford
Grafter is my choice of tool!!!
I used to work for a well know drainage outfit, and used to hand dig all day, everyday. Everyone can dig but it all depends on the ground. Obviously sand is easy but so is hard clay (comes out in a tidy heap) the only down side is when it gets wet.
Ive been through alot of Gas and water pipes in my time and used to enjoy the break!!! (waiting for the four gas vans to come and fix the main to the house.)
The water was a twat as I always punctured one where the main stop tap was knackered, so had to turn on all the taps to the house and try and squeeze new connection together whilst getting soaked in freezing water.
Electric was enjoyable as I enjoyed watching the electricians (dicing with death) repairing the live cables.
Those were the days!!!!
I used to work for a well know drainage outfit, and used to hand dig all day, everyday. Everyone can dig but it all depends on the ground. Obviously sand is easy but so is hard clay (comes out in a tidy heap) the only down side is when it gets wet.
Ive been through alot of Gas and water pipes in my time and used to enjoy the break!!! (waiting for the four gas vans to come and fix the main to the house.)
The water was a twat as I always punctured one where the main stop tap was knackered, so had to turn on all the taps to the house and try and squeeze new connection together whilst getting soaked in freezing water.
Electric was enjoyable as I enjoyed watching the electricians (dicing with death) repairing the live cables.
Those were the days!!!!
Maintenance Man