Which van?

For the discussion of hand tools, power tools, operated and non-operated plant, and all sorts of kit associated with the paving and drainage trades
SamD
Posts: 2
Joined: Sat Nov 22, 2008 5:50 pm
Location: Edinburgh

Post: # 35899Post SamD

Hi there, this is my first post, so hi to you all, I've always worked with companies that have supplied vans however i'm taking the step of getting my own van fairly soon, as its going to be my only vehicle and i live in a city i was thinking something along the lines of a vito or transporter. One main priority though is being able to get a bulk bag in the back. Does anybody know if this is possible with a smaller van? Any suggestions would be great. Many thanks. Sam

Pablo
Posts: 1990
Joined: Sun Mar 25, 2007 10:49 pm
Location: N/Ireland

Post: # 35923Post Pablo

Hi Sam those 2 Vans might be a bit light if you're going to haul a ton plus passengers and tools a lot of them have tailgate doors not barndoors too so a forklift can't load them. I use Iveco Dailys I have a SWB 29L10 and a 35C12. The 29L10 is about the same length but taller and wider than the vito and transporter. They are bombproof have rear wheel drive parts are easy and not to pricey and the turning circle is brilliant. I'm on my second 29 the first having done just under 200000 miles mostly with a trailer or a full load. They have a gross of 3.2tons new or second hand they are good value. The engines are fast and powerful though not great for economy but not terrible. The worst thing about them is they have crap cupholders. Good luck with starting out on your own.



Edited By Pablo on 1238017823
Can't see it from my house

Artisan
Posts: 46
Joined: Sun Mar 18, 2007 9:49 am
Location: Weston Super Mare

Post: # 35927Post Artisan

We have a Nissan Primastar (same as Vivaro) which is a superb van, comfortable, fast, economical, and so far at least completely reliable. I'd recomend the full bulkhead, always better than getting poked in the back of the swede by a flying chisel during an emergrency stop. Excellent load space, can shift quite a few 6' panels.

We also have a Citroen Relay which has cost a fortune in gearbox repairs, and other constant annoying problems.

Amogen
Posts: 64
Joined: Mon Mar 16, 2009 10:45 pm
Location: Huddersfield, West Yorkshire
Contact:

Post: # 35942Post Amogen

Second vote for the Vivaro.

We have all got LWB Crew Cab Versions. Slightly bigger load that the SWB, but has 6 proper seats with bulkhead behing rear seats. Fast, efficient and comfortable.

Best part about it is that at weekends, i can fit 6 mountain bikes, plus luggage and other stuff in the back, and me and 5 mates in the front. Also fits in 2 Motor Cross Bikes. One Quad. But not all at the same time mind!!!!
Regards,

Andy Willcock
Amogen Drive, Decking & Patio Cleaners
Premier Exterior Surface Cleaners & Restorers
FREE Quotes & FREE Demonstrations - Nationwide Coverage
Website
info@amogen.com
Est. 2004

DNgroundworks
Posts: 1951
Joined: Sat Dec 06, 2008 10:28 pm
Location: Preston, Lancashire

Post: # 35945Post DNgroundworks

Good old transit for me!

msh paving
Site Admin
Posts: 1854
Joined: Tue Aug 19, 2008 7:03 pm
Location: kings lynn norfolk
Contact:

Post: # 35946Post msh paving

iv not had a closed in van for paving and ground work always had a cabstar tipper,transit tipper, and now a 7.5 ton tipper,if you are collecting blocks,slabs,sand,cement a closed in van is a pain to forklift into or a loading shovel to tip in,i know tools are locked up but i always bolted a tool vault on the back that's my view anyway...........lol MSH :)
paving, mini-crusher, mini-digger hire and groundwork
http://mshpaving.co.uk

topgrafter2007
Posts: 83
Joined: Tue Feb 10, 2009 4:50 pm
Location: blackpool

Post: # 35951Post topgrafter2007

id go for iveco tipper, had one for 3yr now, never let me down in anyway. easy to fix, bits are cheap, engines are bombproof! does 80mph with load. not costly to buy neither. got two transits and although there ok they arnt most reliable ive had. my 135bhp goes like stink :) good old iveco tipper 52 or 53 plate costs bout 3 to 4grand and then stick toolbox on back and upgraded leafsprings if you can afford em. they sag under pressure (bit like old women APPARENTLY...) :D

yourgardenworks.co.uk
Posts: 111
Joined: Wed Feb 20, 2008 1:25 pm
Location: Cumbria
Contact:

Post: # 36010Post yourgardenworks.co.uk

I have a Citroen Relay.

I wish i didn't have a Citroen Relay.

Will carry a bulk bag no problem, it's still a stinking heap of junk though.

Go go for a Nissan Cabstar.

digerjones
Posts: 889
Joined: Fri Jan 18, 2008 9:32 pm
Location: cheshire

Post: # 36018Post digerjones

yes i run a cabstar, carry weight no problem.i've had over 4 tonne on mine. did'nt bother it too much
dylan

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 36029Post Dave_L

digerjones wrote:i've had over 4 tonne on mine. did'nt bother it too much
Do you have weighbridges nearby? :p
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

msh paving
Site Admin
Posts: 1854
Joined: Tue Aug 19, 2008 7:03 pm
Location: kings lynn norfolk
Contact:

Post: # 36030Post msh paving

considering a cabstar tipper carrys 1.5ton , i think to carry 4ton is a little bit optomistic MSH :)
paving, mini-crusher, mini-digger hire and groundwork
http://mshpaving.co.uk

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 36032Post Dave_L

Mr Jones' Cabstar as seen earlier!

Image
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

msh paving
Site Admin
Posts: 1854
Joined: Tue Aug 19, 2008 7:03 pm
Location: kings lynn norfolk
Contact:

Post: # 36033Post msh paving

:D :D :D :D :D MSH
paving, mini-crusher, mini-digger hire and groundwork
http://mshpaving.co.uk

digerjones
Posts: 889
Joined: Fri Jan 18, 2008 9:32 pm
Location: cheshire

Post: # 36045Post digerjones

sorry should have said total weight. i think the photo would be correct if i carried 4 ton. plus i did'nt say i was on the rooad with it i do know its 3.40 tonnes gross
dylan

digerjones
Posts: 889
Joined: Fri Jan 18, 2008 9:32 pm
Location: cheshire

Post: # 36046Post digerjones

just looking at the photo again why would the truck be tipping his load up while in a houseing estate.
dylan

Post Reply