French drains - Drains

Foul and surface water, private drains and public sewers, land drains and soakaways, filter drains and any other ways of getting rid of water.
Post Reply
Colin James
Posts: 47
Joined: Fri Oct 24, 2008 12:30 pm
Location: Glasgow

Post: # 33208Post Colin James

What is a French Drain?

Also is a "metalled road" considered acceptable in 21st. century? I am think of dust, loose stones from traffic and so forth.

Regards,
Colin.
C. J. Cranwell

danensis
Posts: 335
Joined: Mon Aug 11, 2003 4:24 pm
Location: Derbyshire
Contact:

Post: # 33209Post danensis

See the main web site? See the box at the top which says "Google Search"? Have you tried putting "French Drain" in there?

As for metalling, see-
http://en.wikipedia.org/wiki/Pavement_(material)

GB_Groundworks
Site Admin
Posts: 4420
Joined: Sat Aug 09, 2008 3:55 pm
Location: high peak
Contact:

Post: # 33212Post GB_Groundworks

a french drain is typically a trench with a perforated pipe laid in it and then back filled with a porus material such as clean stone, they are nothing to do with the French but were invented by Henry French of Concord, Massachusetts haha

Image

main page drianage

gi
Giles

Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.

http://www.gbgroundworks.com

GB_Groundworks
Site Admin
Posts: 4420
Joined: Sat Aug 09, 2008 3:55 pm
Location: high peak
Contact:

Post: # 33213Post GB_Groundworks

quote from that wiki page

Metalling

Metal or metalling has had two distinct usages in road paving. Metalling originally referred to the process of creating a carefully engineered gravel roadway. The route of the roadway first would be dug down several feet. Depending on local conditions, French drains may or may not have been added. Next, large stone was placed and compacted, followed by successive layers of smaller stone, until the road surface was a small stone compacted into a hard, durable surface.
Road metal later became the name of stone chippings mixed with tar to form the road surfacing material tarmac. A road of such material is called a "metalled road" in British usage, or less often a macadam road, however the most common name applied to any U.K road surface is "tarmac", regardless of its actual construction. The word metal is derived from the Latin metallum, which means both "mine" and "quarry", hence the roadbuilding terminology.
Giles

Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.

http://www.gbgroundworks.com

danensis
Posts: 335
Joined: Mon Aug 11, 2003 4:24 pm
Location: Derbyshire
Contact:

Post: # 33230Post danensis

If you give a man a fish, you feed him for a day -- teach him to fish and you feed him for a lifetime.

GB_Groundworks
Site Admin
Posts: 4420
Joined: Sat Aug 09, 2008 3:55 pm
Location: high peak
Contact:

Post: # 33231Post GB_Groundworks

i quoted the wiki page because i thought it was of general interest to the cabin, as i didn't know exactly why a metalled rd was called that save everyone a trip to wiki land.
Giles

Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.

http://www.gbgroundworks.com

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 33240Post Dave_L

I saw a sign the other day saying "Unmetalled Road" - thought that was odd, never seen one before!
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

Pablo
Posts: 1990
Joined: Sun Mar 25, 2007 10:49 pm
Location: N/Ireland

Post: # 33243Post Pablo

danensis wrote:If you give a man a fish, you feed him for a day -- teach him to fish and you feed him for a lifetime.
Have you heard the other version.
If you give a somalian a fish he will eat, if you give him a rod he will feed his family but don't ever give him a boat.


p.s. for all the mind how you go's the above is not in any way intended to be racist.
Can't see it from my house

Mikey_C
Posts: 952
Joined: Mon Oct 30, 2006 8:24 pm
Location: Bournemouth, Dorset

Post: # 33247Post Mikey_C

I thought it was give a man a fish and he will eat for day, teach a man to fish, and he will spend most weekends on boat drink beer and catching nothing. :D

seanandruby
Site Admin
Posts: 4713
Joined: Mon Jun 26, 2006 11:01 am
Location: eastbourne

Post: # 33255Post seanandruby

Dave_L wrote:I saw a sign the other day saying "Unmetalled Road" - thought that was odd, never seen one before!
perhaps it was'nt done to spec so wont take heavy loads ???
sean

Tony McC
Site Admin
Posts: 8346
Joined: Mon Jul 05, 2004 7:27 pm
Location: Warrington, People's Republic of South Lancashire
Contact:

Post: # 33260Post Tony McC

The trouble with 'French Drains' is that, like their cousins, the Soakaways, there is a lot of variation in what is considered to be a 'French Drain'. In essence, any form of trench with porous/permeable backfill would qualify as a FD, but some will incorporate a permeable pipe (as shown in the diagram above) and others will not. Some will be constructed using clean gravel, while others are usually little more than half-bricks or rubble stone.

The technically-correct definition of a French Drain is pretty much as shown in the diagram, with graded clean gravel and a permeable pipe at the base. They are more usually referred to as "Filter Drains" in civil engineering speak.
Site Agent - Pavingexpert

Colin James
Posts: 47
Joined: Fri Oct 24, 2008 12:30 pm
Location: Glasgow

Post: # 33341Post Colin James

Thank you for all this information.
The description of a French Drain was helpful, confirmed my guess.

The metalled road explanation was good, especially the fact that there seems to be two possible versions. This clears up a bit of confusion I had.

The fish????

Regards,
Colin.
C. J. Cranwell

Post Reply