Micro diggers - Worthwhile ?

For the discussion of hand tools, power tools, operated and non-operated plant, and all sorts of kit associated with the paving and drainage trades
yourgardenworks.co.uk
Posts: 111
Joined: Wed Feb 20, 2008 1:25 pm
Location: Cumbria
Contact:

Post: # 30192Post yourgardenworks.co.uk

Evening all,

Does anybody on here own a micro digger and if so do you hire it out as well as use it for your own projects ?

We spent 2 or 3 days last week digging out by hand not realising that there was access to the work through a hidden doorway in an outside shed and it got me thinking about Micro's and there usability.

I dont know of many firms round here who hire them out daily except of course the usual players and wondered if anybody had or is in this game and what there thoughts are ?

Cheers Dave.

darrenba
Posts: 77
Joined: Sat Jul 05, 2008 6:47 pm
Location: Dorset, UK
Contact:

Post: # 30205Post darrenba

Hi Dave,

I've recently purchased one for the project I'm currently working on. It's been worth its weight in gold. The access to the rear was extremely resticted (800mm width). In addition I needed to get to the bottom of the garden down a very steep slope which resulted in a scaffold ramp being constructed (see pics below). Nothing bigger than a micro could have done the job. Combined with a Muck Truck the machine as been invaluble.

Image

Image

Image

I'm considering hiring it out locally at the moment.

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 30209Post Dave_L

A very good combination there Darren. Very useful in the right circumstances.

Expanding tracks I take it? So, so useful. We don't own one, we just hire one in when and as we need them. When you take into account the costs of hand-digging vs a Micro and a bit of jiggery-pokery getting the machine in on-site, it's a no brainer.




Edited By Dave_L on 1216797364
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

yourgardenworks.co.uk
Posts: 111
Joined: Wed Feb 20, 2008 1:25 pm
Location: Cumbria
Contact:

Post: # 30213Post yourgardenworks.co.uk

Great pics Darren, i was thinking of hiring the machine out with a driver when its not in use by ourselves and getting an auger attachment, for those pesky fence post holes. Good work.

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 30215Post Dave_L

Is that ramp as steep as it looks? :rock:

It's not the slope that would worry me when tracking the machine up & down it, it's the large expanse of dirty cold water that awaits at the bottom!!!! :cool:
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

yourgardenworks.co.uk
Posts: 111
Joined: Wed Feb 20, 2008 1:25 pm
Location: Cumbria
Contact:

Post: # 30243Post yourgardenworks.co.uk

I think its not quite as steep as it appears Dave, the last picture doesnt look as bad as the first.

darrenba
Posts: 77
Joined: Sat Jul 05, 2008 6:47 pm
Location: Dorset, UK
Contact:

Post: # 30244Post darrenba

It was steep enough especially on the way down the 1st time and the tracks start slipping :D

Mikey_C
Posts: 952
Joined: Mon Oct 30, 2006 8:24 pm
Location: Bournemouth, Dorset

Post: # 30245Post Mikey_C

Whereabouts in Dorset is that Darren, it looks familiar, is back on to the stour in bournemouth/christchurch

darrenba
Posts: 77
Joined: Sat Jul 05, 2008 6:47 pm
Location: Dorset, UK
Contact:

Post: # 30246Post darrenba

Hi Mikey,

Well spotted, yes it is the Stour, near Wimborne.

Digbits
Posts: 25
Joined: Mon Jul 21, 2008 2:37 pm
Location: Staffordshire
Contact:

Post: # 30276Post Digbits

Micro diggers generally perform far better than people expect in terms of digging/loading capabilities.

A few years back my then next door neighbour hired one to dig a pond, found he couldn't drive it, and persuaded me to use it (for a few cold tinnies as I remember) to load wheel barrows that he then carted to the front of the house.

Basically, the poor bloke - he was after finishing the job over a single weekend - nearly gave himself a hernia trying to keep up.

For what it's worth, the big downside with most smaller minis and micros, which gets worse the smaller the machines are is stability. Novices do need to proceed with a bit of caution. If it's not woroking on gradients that catch people out then it's swinging and/or reaching on soft ground.

yourgardenworks.co.uk
Posts: 111
Joined: Wed Feb 20, 2008 1:25 pm
Location: Cumbria
Contact:

Post: # 30279Post yourgardenworks.co.uk

Cheers Marcus, i'm thinking niche that doesnt appear to have been spotted around these ways, i may be wrong, but i guess i wont know till i try and i will always get a few quid back if all else fails.

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 30280Post Dave_L

Digbits wrote:Basically, the poor bloke - he was after finishing the job over a single weekend - nearly gave himself a hernia trying to keep up.
Oh dear, I know what that's like - had to do a few barrow out jobs myself!

We soon conceded defeat and hired in a tracked dumper. Much more fun!
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

ambient
Posts: 393
Joined: Fri Jun 13, 2008 6:20 pm
Location: bolton lancs
Contact:

Post: # 30299Post ambient

we hire one in now and again costs £40 +vat a day if you collect its worth every penny
ambientdriveways.co.uk ambientexcavations-bolton.co.uk

Mikey_C
Posts: 952
Joined: Mon Oct 30, 2006 8:24 pm
Location: Bournemouth, Dorset

Post: # 30306Post Mikey_C

I find the most knackering, back break demoralizing way is to drive a 3Tonn'er your self load two wheel barrows (placed next to each other) and then get out, run them up a skip ramp to the top of an 8yd. Whilst the power barrow sits idly by because you haven't got the ramp that fits the skip. Best done with at least two people watching. Long story which I may one day get round to posting the photos from.

That is a steep ramp from the photo and knowing what floats about in Stour you would catch me risking it.

darrenba
Posts: 77
Joined: Sat Jul 05, 2008 6:47 pm
Location: Dorset, UK
Contact:

Post: # 30309Post darrenba

Well, the ramp has gone now and 6 tons of ballast, a ton of pea shingle, around 70 9" hollow concrete blocks and a load of cement later we have a retaining wall and platfrom for fishing / boating from :D

Image

Image

And I didn't end up with the digger upside down in the river either. :D

Post Reply