Confused - Diyer confused about subbase
-
- Posts: 4
- Joined: Tue May 27, 2008 1:28 pm
- Location: wylam
hi
I've read a lot of information on this site and wondered if someone could shed a little more light for me. I plan to create a 4x3m patio on clay soil. I think I will need some subbase - but am not sure (there will only be light traffic on the patio).
Can I just compact the clay and then lay down 5cm of sharp sand to lay the flags on, or should I lay some sort of subbase and then the sand? if I need some subbase could someone recommend something I can pick up from Jewsons/Wickes etc.
Also could someone tell me what Dolomite is - I cant find any useful info on this anywhere - but many builders (in the NE) seem to use this as subbase
thanks
david
I've read a lot of information on this site and wondered if someone could shed a little more light for me. I plan to create a 4x3m patio on clay soil. I think I will need some subbase - but am not sure (there will only be light traffic on the patio).
Can I just compact the clay and then lay down 5cm of sharp sand to lay the flags on, or should I lay some sort of subbase and then the sand? if I need some subbase could someone recommend something I can pick up from Jewsons/Wickes etc.
Also could someone tell me what Dolomite is - I cant find any useful info on this anywhere - but many builders (in the NE) seem to use this as subbase
thanks
david
-
- Posts: 884
- Joined: Thu Feb 08, 2007 12:28 pm
- Location: Reading
Wickes (spit spit) sell bulk bags of DTp Type 1 (perfect sub base material) for about £30 - possibly including delivery. This is slightly light for your area but if you compact it well and then allow about 1 1/2 tonnes of sand and cement you should be fine. Assuming 40mm slabs, the total thickness of all three layers will be just under 15cm or 6", which is ok for light traffic.
Ideally, take out a bit more clay and make it 2 bulk bags of type 1 - this will give you a sub-base thickness of about 7cm - perfect for a sound base for a long time to come.
Ideally, take out a bit more clay and make it 2 bulk bags of type 1 - this will give you a sub-base thickness of about 7cm - perfect for a sound base for a long time to come.
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 884
- Joined: Thu Feb 08, 2007 12:28 pm
- Location: Reading
A hand tamper or big sledge on end. Better to hire a wacker, though. 1 bag of sand will probably leave you a bit short.
4 x 3 = 12 x .05 x 2.2 = 1.32t. Bulk bag of sand = 0.88t (typically) + 5 bags cement 0.125t = 1.0t (and 5 kg!). This will leave you 320kg light, or 13 small bags of sand + 3 cement.
4 x 3 = 12 x .05 x 2.2 = 1.32t. Bulk bag of sand = 0.88t (typically) + 5 bags cement 0.125t = 1.0t (and 5 kg!). This will leave you 320kg light, or 13 small bags of sand + 3 cement.
-
- Site Admin
- Posts: 4713
- Joined: Mon Jun 26, 2006 11:01 am
- Location: eastbourne
-
- Posts: 4
- Joined: Tue May 27, 2008 1:28 pm
- Location: wylam
right thats pretty easy to follow - but what's the .05 and the 2.2?
my slabs are pretty old and heavy, which is the best method to lay the sand? shall I lay it all down on the subbase and then wack it down? or should I try to use the individual method here? I'll be doing all the work myself so which ever is easiest on my little back would be best. I managed to get a wacker for £25 for the weekend so I'm all set to go
my slabs are pretty old and heavy, which is the best method to lay the sand? shall I lay it all down on the subbase and then wack it down? or should I try to use the individual method here? I'll be doing all the work myself so which ever is easiest on my little back would be best. I managed to get a wacker for £25 for the weekend so I'm all set to go
-
- Posts: 607
- Joined: Mon Jul 09, 2007 11:14 pm
- Location: gosport
:p :p short of actually doin it for the bloke i thought you did very well. get him to read the main site.. it is all there/ :;):Rich H wrote:seanandruby wrote:............Nothing like keeping it simple for the DIYer a?
Thought I was!
short of actually do in it for the bloke, i thought you did pretty good...but tell him to read the main site.. its all there
general builder, maintenance engineer, gas and plumbing installations, extensions etc
-
- Site Admin
- Posts: 4713
- Joined: Mon Jun 26, 2006 11:01 am
- Location: eastbourne
If it was easy to understand then why did the person then ask the question above? was'nt slating you rich, it just seems a little long winded for the typical DIYer. I think it is easier just to tell them the final calculation they are looking for, or direct them to the calculator. it is quite daunting for some people to lay a patio for the first time and can find it hard to understand the working out. That is why the guv'ner in his infinite wisdom created the calculator page.dbargna wrote:right thats pretty easy to follow - but what's the .05 and the 2.2?
sean
-
- Site Admin
- Posts: 8346
- Joined: Mon Jul 05, 2004 7:27 pm
- Location: Warrington, People's Republic of South Lancashire
- Contact:
Dolomite is a specific type of limestone used in NE England. It is subtly different to the limestones from, say, the Peak District or the Cotswolds. The use of the term 'dolomite' in that area of England can be misleading, as it is sometimes used as a generic term for 'sub-base material' whether it's dolomite or not. I've met gangs that refer to a sandstone type 1 as 'dolomite' even though it's a completely different rock type.
Site Agent - Pavingexpert
-
- Posts: 4
- Joined: Tue May 27, 2008 1:28 pm
- Location: wylam
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
£160 all in?? That's a right bargain!
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page