Vacuum form tooling - Guidance

For the discussion of hand tools, power tools, operated and non-operated plant, and all sorts of kit associated with the paving and drainage trades
Post Reply
garytreez
Posts: 3
Joined: Sat Apr 26, 2008 4:38 pm
Location: north yorkshire

Post: # 27562Post garytreez

Good day to you all...im new to this forum although i have followed this bible of a website for a couple of years.

My leftfield question is this _ are there any makers of tooling for vacuum forming machines out there....and ...where can i get my hands on some "aluminium filled epoxy resin" for casting (to make my own mould casting tools.

Thanks

Gary ???
concrete wetcasting
Top
seanandruby
Site Admin
Posts: 4713
Joined: Mon Jun 26, 2006 11:01 am
Location: eastbourne

Post: # 27574Post seanandruby

No. but i know where you can get sand, cement, bricks, flags etc for footpaths and drives :;):
sean
Top
garytreez
Posts: 3
Joined: Sat Apr 26, 2008 4:38 pm
Location: north yorkshire

Post: # 27580Post garytreez

seanandruby wrote:No. but i know where you can get sand, cement, bricks, flags etc for footpaths and drives :;):
Yep so do i........The Gaza strip.....its laying in the street...just help youreself :D
concrete wetcasting
Top
flowjoe
Posts: 1136
Joined: Sun May 08, 2005 9:25 am
Location: North West

Post: # 27583Post flowjoe

Google "MC Building Chemicals" in Birmingham for the epoxy, if they don`t have it they will know someone who does



Edited By flowjoe on 1209296290
http://draindomain.com

Many paths can lead to riches, few in sunlight, some in ditches
Top
garytreez
Posts: 3
Joined: Sat Apr 26, 2008 4:38 pm
Location: north yorkshire

Post: # 27585Post garytreez

flowjoe wrote:Google "MC Building Chemicals" in Birmingham for the epoxy, if they don`t have it they will know someone who does
thanks !!!!!!!!!
concrete wetcasting
Top
Post Reply

Return to “Tools and Plant”