Crushed glass as bedding material ?

All forms of block paving, brick paving, flexible or rigid, concrete or clays, new construction or renovation
Post Reply
Rick
Posts: 105
Joined: Mon Apr 14, 2003 8:35 pm
Location: S.Wales

Post: # 25951Post Rick

Aprox 200 sq m of clay pavior drive to be laid .. moderate slope to part of drive.
Been told that I could use crushed recycled glass instead of sharp sand ? …. Seems there is a plant for this only 2 miles away, and many local paving firms use this instead of sharp sand … as it’s cheaper.
Is it as good for the job ?

surreyhillslandscapes.com
Posts: 127
Joined: Mon Nov 05, 2007 5:37 pm
Location: Surrey
Contact:

Post: # 25956Post surreyhillslandscapes.com

Haven't used it myself but a few lads from other paving firms around here have, they say it's not bad to work with and rain doesn't effect it so much, which is good considering the climate we live in..
ooo0
( ) 0ooo
\ ( ( )
\_) ) /
(_/

I've just screeded that!!!!!!!

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 25960Post lutonlagerlout

so you need approx 20 tonnes of bedding material,how much difference in cost is it between grit sand and glass?
personally i would go for the tried and tested formula every time
LLL :)
"what,you want paying today??"

YOUR TEXT GOES HERE

James.Q
Posts: 368
Joined: Tue Sep 25, 2007 7:20 pm
Location: darwen
Contact:

Post: # 25962Post James.Q

some times you have to move with the times:p
One of the symptoms of an approaching nervous breakdown is the belief that one's work is terribly important.

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 25968Post Dave_L

Wouldn't you suffer from badly cut hands? :)
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

Tony McC
Site Admin
Posts: 8346
Joined: Mon Jul 05, 2004 7:27 pm
Location: Warrington, People's Republic of South Lancashire
Contact:

Post: # 25979Post Tony McC

Apparently, the crushed glass (it's been tumbled or treated in some way to render it mostly harmless) is an excellent laying course material for block paving, but, as I said in the post to the Flags section, it only seems to be available in and around that London, which is traditionally a bit of a problem area for good aggregates, hence the alleged success of this recycled glass product.

Elsewhere, crushed/tumbled glass is finding its way into Type 1 and Type 2 aggregate blends, but I've not seen it as a pure laying course material.....yet.
Site Agent - Pavingexpert

Paverman Dan
Posts: 70
Joined: Tue Jun 29, 2004 5:27 am

Post: # 26262Post Paverman Dan

Interesting concept.

Since glass is melted sand . . . . . with the right gradation, I think it would work, right?

The only thing I wonder is if the tumbling would remove the angular properties that would give a setting bed like this it's strength and drainage capabilities.

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 26263Post Dave_L

It'd be like laying on a load of marbles!! :D
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

matt h
Posts: 607
Joined: Mon Jul 09, 2007 11:14 pm
Location: gosport

Post: # 26285Post matt h

better than losing them!:D
general builder, maintenance engineer, gas and plumbing installations, extensions etc

mark39
Posts: 11
Joined: Wed Jan 23, 2008 9:36 pm
Location: mansfield notts
Contact:

Post: # 27239Post mark39

we have used some for some diplays we did for a local merchant thet supplied when we looked at it we didnt like the look of it but anyway we did the job and it was ok but it had a really rank smell maybe its treated with something and the big no no for us is when its windy you have fine glass paticles blowing in your face not good
i know you get the same problems with sharpe sand but its just the thought of it being glass !!
we wouldnt use it ourselves but we know of one local gypo firm that uses it in notts nto sure of prices but it must be cheap if their using it !!
bad back!
aching joints !
must be a paver !!

no work !
no job!
must be an ex paver !!

Rick
Posts: 105
Joined: Mon Apr 14, 2003 8:35 pm
Location: S.Wales

Post: # 27242Post Rick

interesting that it was a local firm firm Gypo camp that had used this on the job I looked at ...

Anyway now ordered in Sharp sand to BS spec ... costing me £17.85 a tonne .. but no point in scrimping on the bedding

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 27251Post Dave_L

Is that a delivered load, tipped to site? (£17.85/t)
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

Rick
Posts: 105
Joined: Mon Apr 14, 2003 8:35 pm
Location: S.Wales

Post: # 27256Post Rick

per tonne deliverred to site (10 tonne load)

could get it cheaper .. but 'untested' 3-5mm grit sand, not to any particular standard.

Post Reply