Crushed glass as bedding material ?
-
- Posts: 105
- Joined: Mon Apr 14, 2003 8:35 pm
- Location: S.Wales
Aprox 200 sq m of clay pavior drive to be laid .. moderate slope to part of drive.
Been told that I could use crushed recycled glass instead of sharp sand ? …. Seems there is a plant for this only 2 miles away, and many local paving firms use this instead of sharp sand … as it’s cheaper.
Is it as good for the job ?
Been told that I could use crushed recycled glass instead of sharp sand ? …. Seems there is a plant for this only 2 miles away, and many local paving firms use this instead of sharp sand … as it’s cheaper.
Is it as good for the job ?
Rick Hughes[br]UK SelfBuild: http://uk.groups.yahoo.com/group/UK_Selfbuild/
-
- Posts: 127
- Joined: Mon Nov 05, 2007 5:37 pm
- Location: Surrey
- Contact:
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 368
- Joined: Tue Sep 25, 2007 7:20 pm
- Location: darwen
- Contact:
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
Wouldn't you suffer from badly cut hands?
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
- Site Admin
- Posts: 8346
- Joined: Mon Jul 05, 2004 7:27 pm
- Location: Warrington, People's Republic of South Lancashire
- Contact:
Apparently, the crushed glass (it's been tumbled or treated in some way to render it mostly harmless) is an excellent laying course material for block paving, but, as I said in the post to the Flags section, it only seems to be available in and around that London, which is traditionally a bit of a problem area for good aggregates, hence the alleged success of this recycled glass product.
Elsewhere, crushed/tumbled glass is finding its way into Type 1 and Type 2 aggregate blends, but I've not seen it as a pure laying course material.....yet.
Elsewhere, crushed/tumbled glass is finding its way into Type 1 and Type 2 aggregate blends, but I've not seen it as a pure laying course material.....yet.
Site Agent - Pavingexpert
-
- Posts: 70
- Joined: Tue Jun 29, 2004 5:27 am
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
It'd be like laying on a load of marbles!!
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
- Posts: 11
- Joined: Wed Jan 23, 2008 9:36 pm
- Location: mansfield notts
- Contact:
we have used some for some diplays we did for a local merchant thet supplied when we looked at it we didnt like the look of it but anyway we did the job and it was ok but it had a really rank smell maybe its treated with something and the big no no for us is when its windy you have fine glass paticles blowing in your face not good
i know you get the same problems with sharpe sand but its just the thought of it being glass !!
we wouldnt use it ourselves but we know of one local gypo firm that uses it in notts nto sure of prices but it must be cheap if their using it !!
i know you get the same problems with sharpe sand but its just the thought of it being glass !!
we wouldnt use it ourselves but we know of one local gypo firm that uses it in notts nto sure of prices but it must be cheap if their using it !!
bad back!
aching joints !
must be a paver !!
no work !
no job!
must be an ex paver !!
aching joints !
must be a paver !!
no work !
no job!
must be an ex paver !!
-
- Posts: 105
- Joined: Mon Apr 14, 2003 8:35 pm
- Location: S.Wales
interesting that it was a local firm firm Gypo camp that had used this on the job I looked at ...
Anyway now ordered in Sharp sand to BS spec ... costing me £17.85 a tonne .. but no point in scrimping on the bedding
Anyway now ordered in Sharp sand to BS spec ... costing me £17.85 a tonne .. but no point in scrimping on the bedding
Rick Hughes[br]UK SelfBuild: http://uk.groups.yahoo.com/group/UK_Selfbuild/
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
Is that a delivered load, tipped to site? (£17.85/t)
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
- Posts: 105
- Joined: Mon Apr 14, 2003 8:35 pm
- Location: S.Wales
per tonne deliverred to site (10 tonne load)
could get it cheaper .. but 'untested' 3-5mm grit sand, not to any particular standard.
could get it cheaper .. but 'untested' 3-5mm grit sand, not to any particular standard.
Rick Hughes[br]UK SelfBuild: http://uk.groups.yahoo.com/group/UK_Selfbuild/