Buying an easyfloat - Where from??

[spdirect]

Hello,

Looking for some advice on sourcing a new easyfloat for concreting - like the one that can be hired at hss.

http://www.hss.com/g/44119/Easy-Float-Trowel.html

Getting fed up of having to keep hiring one!!

Thanks

spdirect

[very simple simon]

Three places to try are
conquip 01420 592900 they are the cheapest in my experience
speedcrete
buildspan or tomasa do them as well but probably a bit dearer

Good ones are kraft tool co. or bon tool co. from the states. UK made Belle ones do come up on ebay uk quite often, might be worth a look if you don't mind second hand?

IME I would advise you not to buy the all in one brush & float. Also wise to get the pitch bracket with the float instead of a fixed head one as it makes life a lot simpler.

[spdirect]

Great - Thanks for your help, will look at these ideas on Monday.

Thanks

spdirect

[seanandruby]

Do you want the bull float, or the glider. the bull float is usefull for bringing up the fat, where a glider (easy float) skims easier over the surface and in my opinion gives a better finish. :;):

[spdirect]

Thanks for your reply - I think i will proably be the glider, more than likely from belle, we have a quite a few areas to get concreted in 6 cube batches, and have found the easyfloat to be handy in getting a smooth finish. Will try and find a belle dealer on Monday.

Thanks

spdirect