Office arse again - hardcore and setts suppilers?

Setts and cobbles, tarmac, asphalt, resin systems, concrete whether it's plain, patterned or stencilled, gravels, etc.
Post Reply
truenorth
Posts: 11
Joined: Wed Mar 28, 2007 6:25 pm
Location: MAnchester

Post: # 22712Post truenorth

Morning all,

Couple of quick questions...

Hardcore material, MOT type 1 - the best I can find so far is £35.00 per tonne. Is this reasonable? I'm looking to cover an area approx 5.6m x 7m with a pond area 1.5m x 2m in the middle. How much hardcore do I need?

Cobble setts - nothing too expensive, and ideally not the concrete remakes. Having looked at one of AJ Mac's previous answers I should be paying 60-90 quid per tonne, with each tonne covering 4-5 m². I can't find anything remotely near the price. Am looking to cover a strip 1m x 8m. Where should I start looking?

The house is near Ashby-de-la-Zouch in the midlands, so if there's anything geographically close it would be great.

Thanks for the help.

TN

very simple simon
Posts: 44
Joined: Thu Sep 20, 2007 3:47 pm
Location: c/o The Black Pig, Staple, Kent

Post: # 22714Post very simple simon

35.00 is par for the course for bulk bags.

if you get it tipped will probably be nearer 20.00 including all part load charges.

quants - look it up on this highly respected and eminently well written website

http://www.pavingexpert.com/calcall.htm#focus14

for 8t and above get it tipped, prices will be much better
New and improved...Mk. II...10% simpler...still called Simon!

Tony McC
Site Admin
Posts: 8346
Joined: Mon Jul 05, 2004 7:27 pm
Location: Warrington, People's Republic of South Lancashire
Contact:

Post: # 22716Post Tony McC

What do you mean by "cobble setts". They are either cobbles, or they are setts: they can't be both, in the strictest definition of the terms'.

Assuming you mean setts, then what type of setts? Cubes? Long setts? Reclaimed? New? Granite? Sandstone? Whin?

It's a bit like asking for "a car" - you need to be a little more specific or you could end up with a Cinquecento!
Site Agent - Pavingexpert

truenorth
Posts: 11
Joined: Wed Mar 28, 2007 6:25 pm
Location: MAnchester

Post: # 22718Post truenorth

apologies.

square setts would be great, dark in colour and not too expensive ideally. I'm on a pretty tight budget, so I guess reclaimed is out of the question, but a bit 'rustic' would suit the job.

does that make more sense?

TN

Rich H
Posts: 884
Joined: Thu Feb 08, 2007 12:28 pm
Location: Reading

Post: # 22728Post Rich H

Most bm's will do a 5t load of MOT for around £100-£125, tipped loose.

If you want a rustic or natural look choose either granite (around 70p each or £57/sq.m at 9x9/m) or sandstone at 50p each or £40/sq.m.

If you are to lay 8 x 1 m that's a lot of setts and one HELL of a lot of pointing. Consider a polymeric...

GRANITE:
Image

SANDSTONE
Image


NB: I know the mac looks awful in the granite pic. The dropped kerb is going in next week so I only patched it for now to make it safe!

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 22732Post Dave_L

Rich H wrote:NB: I know the mac looks awful in the granite pic. The dropped kerb is going in next week so I only patched it for now to make it safe!
haha! That was the first thing I looked at Rich!!!!
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

truenorth
Posts: 11
Joined: Wed Mar 28, 2007 6:25 pm
Location: MAnchester

Post: # 22734Post truenorth

cheers Rich.

for the uneducated, what's a polymeric?

please excuse if this one sounds daft, but I've seem em do it on the tele, can you simply brush in a dry course of sand and cement to the surface level then lightly water it all and therefore the mixture goes off?

the granite setts look spot on. out of interest, is that just gravel that's compacted for the drive area? and if so, how thick did you lay it?

ta TN

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 22736Post Dave_L

It's all on the site, TN! :)

http://www.pavingexpert.com/point02.htm
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

Post Reply