Sewer coupling - Adding new upvc joint

Foul and surface water, private drains and public sewers, land drains and soakaways, filter drains and any other ways of getting rid of water.
Post Reply
Mason79
Posts: 2
Joined: Sat May 26, 2007 5:06 pm
Location: Worcester

Post: # 19522Post Mason79

Currently I have a 100mm vitrified clay pipe in my garden. Is vitrified clay the same as salt-glazed clay?

I am removing a "12 O'Clock" junction from this pipe and replacing it with a straight through section of 100mm uPVC piping.

Because of the difference in thickness in the vitrified clay pipe and the new uPVC section, can standard couplings be used to connect these together and create an airtight seal or are there "special" couplings needed.

Thanks

Mason
Top
Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:
Contact Dave_L

Post: # 19536Post Dave_L

Sounds like you need 2 x AC4000 collars.

http://www.flexseal.co.uk/products/fern-straight.htm

and specifically

http://www.flexseal.co.uk/products/fl-adaptor.htm



Edited By Dave_L on 1181066363
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page
Top
Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:
Contact Dave_L

Post: # 19645Post Dave_L

How did you get on? :cool:
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page
Top
Post Reply

Return to “Drainage”