Pic contractor in se kent - Pic contrctor
-
- Posts: 4
- Joined: Sun May 13, 2007 11:45 pm
- Location: sandwich, kent
Can somebody help me to find a PIC Contractor in SE Kent. I live in Sandwich & am planning to have my driveway (156 sqm.) done in pattern imprinted concrete.
Found a few national contractors on line, but will not be able to see their products. I am getting really worried reading the various problems that people have had with the product.
Is it safer to go for the old fashioned block paving?
Cheers
Christo
Found a few national contractors on line, but will not be able to see their products. I am getting really worried reading the various problems that people have had with the product.
Is it safer to go for the old fashioned block paving?
Cheers
Christo
christo
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 84
- Joined: Thu Nov 30, 2006 3:56 pm
- Location: South Cheshire
-
- Posts: 934
- Joined: Tue Nov 01, 2005 10:57 pm
- Location: Buckinghamshire
- Contact:
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 4
- Joined: Sun May 13, 2007 11:45 pm
- Location: sandwich, kent
Thanks LLL.
My only worry with block paving is that after a few years it looks a bit tatty & then the weeds...........
I had messages from Brittanica (Bomanite) & Mansion Driveways (Recommended by PIC- Claiming to be the largest in Kent) offering PIC. They look quite reputable on the web. Do you think I should get some quotes - if the company is big & reputable, then are the chances quite good that the installer will be good? I'm still thinking about the concrete, aren't I?
Cheers
Christo
My only worry with block paving is that after a few years it looks a bit tatty & then the weeds...........
I had messages from Brittanica (Bomanite) & Mansion Driveways (Recommended by PIC- Claiming to be the largest in Kent) offering PIC. They look quite reputable on the web. Do you think I should get some quotes - if the company is big & reputable, then are the chances quite good that the installer will be good? I'm still thinking about the concrete, aren't I?
Cheers
Christo
christo
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
2 things mate ,the block paving that looks tatty after a few years is normally the budget level concrete blocks,if you get clay pavers the colour stays forever
and weeds are seeds that have germinated in the joints,yearly maintenance sorts these out
with pic if 1 mistake is made you are bollixed completely
I'm not saying don't do it ,just consider it carefully and research the company that does it fully
LLL
and weeds are seeds that have germinated in the joints,yearly maintenance sorts these out
with pic if 1 mistake is made you are bollixed completely
I'm not saying don't do it ,just consider it carefully and research the company that does it fully
LLL
-
- Site Admin
- Posts: 8346
- Joined: Mon Jul 05, 2004 7:27 pm
- Location: Warrington, People's Republic of South Lancashire
- Contact:
Get at least 3 quotes, and preferably use local firms - local contractors are less likely to crap on their own doorstep, if you know what I mean. I have reservations about many of the so-called national contractors, although there are some good guys out there.
If PICS are recommending someone (and make sure it's a recommendation and not just a suggestion) then they are probably as good as it gets.
If PICS are recommending someone (and make sure it's a recommendation and not just a suggestion) then they are probably as good as it gets.
Site Agent - Pavingexpert
-
- Site Admin
- Posts: 8346
- Joined: Mon Jul 05, 2004 7:27 pm
- Location: Warrington, People's Republic of South Lancashire
- Contact:
The issue of the so-called national contractors using sub-contractors to undertake the work is a major cause of the problems I see with residential paving, and, because of the differences in their respective markets, the PIC trade is more severely affected than is that of block paving.
The scenario runs summat like... client is not happy with work, so contacts main contractor: main contractor has already settled-up with subbie and knows they won't come back to make good: main contractor fobs off client with promise of an extra coat of sealant: sealant fails to rectify problem: client is even more disappointed and gets on to Trading Standards: client has to take action against main contractor, who ought to take action against subbie, but knows that would be peeing into the wind, so the whole process gets dragged out for month after month after month, and the reputation of that particular paving type is further diminished.
Yes: there are good national contractors, and subbies are used, and I'm generalising, but time after time I see problems with the contract chain being a major stumbling block to speedy and efficient remedial work.
Further, if something does go awry (with ANY type of residential paving), it's much easier to get the contractor back if they live within, say, 15 miles, rather than hailing from an anonymous business unit on the other side of the country.
The scenario runs summat like... client is not happy with work, so contacts main contractor: main contractor has already settled-up with subbie and knows they won't come back to make good: main contractor fobs off client with promise of an extra coat of sealant: sealant fails to rectify problem: client is even more disappointed and gets on to Trading Standards: client has to take action against main contractor, who ought to take action against subbie, but knows that would be peeing into the wind, so the whole process gets dragged out for month after month after month, and the reputation of that particular paving type is further diminished.
Yes: there are good national contractors, and subbies are used, and I'm generalising, but time after time I see problems with the contract chain being a major stumbling block to speedy and efficient remedial work.
Further, if something does go awry (with ANY type of residential paving), it's much easier to get the contractor back if they live within, say, 15 miles, rather than hailing from an anonymous business unit on the other side of the country.
Site Agent - Pavingexpert
-
- Posts: 31
- Joined: Sat Jun 26, 2004 12:35 pm
This subject(PIC)does make interesting reading.I am in the same sort of situation as Christo,as in I am looking for a reputable company in my area(Teesside)to do some work in my garden.This would encompass a patio area and 2 pathways.When I first started thinking about the project I was considering paving,block paving or a combination of both.
However,on my travels I noticed quite a few properties had their driveways done with PIC.Any way,the old light bulb lit up and I thought it might do the job.The mix of patterns and colours made me think.Then I started to read the horror stories in the forum and to be honest it has scared me off somewhat.Are there any good companies in my area who deal in PIC or is it better to play safe and seek out a reliable paving/block paving contractor?
However,on my travels I noticed quite a few properties had their driveways done with PIC.Any way,the old light bulb lit up and I thought it might do the job.The mix of patterns and colours made me think.Then I started to read the horror stories in the forum and to be honest it has scared me off somewhat.Are there any good companies in my area who deal in PIC or is it better to play safe and seek out a reliable paving/block paving contractor?
-
- Posts: 585
- Joined: Tue Aug 29, 2006 9:02 pm
- Location: Luanda, Angola
For a few hundred quid a day you can get the tech dept of a PIC supply house out to supervise the pour!
Sort it out yourself, (ie, excavations, sub-base etc) and do the pour with several mates one afternoon and a tech guy telling you what to do and then go to the pub. This is probably the cheapest and easiest and safest way of getting a good PIC installation!
Sort it out yourself, (ie, excavations, sub-base etc) and do the pour with several mates one afternoon and a tech guy telling you what to do and then go to the pub. This is probably the cheapest and easiest and safest way of getting a good PIC installation!