Socketed clayware - Connection to plastic 110mm

[DavidJ19]

Hello

Is an adapter available to connect a plastic 110mm pipe to the socketed end (female?) of a clay pipe?

The clay pipe is in an auckward position to cut so any way of coupling would be of help.

David

[bobhughes]

Any decent BM should have one

Bob

[lutonlagerlout]

i would add a section of hepsleve or super sleeve to the female connection ,in the traditional way with 3:1 mortar and use a clay to plastic adaptor say 30mm away
always a pain in the backside connecting new platic to old clay
cheers LLL

[wingy73]

you need an AC4000 flexi-seal will keep invert levels the same, can't you cut it with 4 inch grinder? frazer civil supplies or keyline should be able to sought you out

[Dave_L]

It's all gone very quiet from DavidJ19 - perhaps he's stuck at Junction 19??

This is what you need.....hopefully you are all sorted and backfilled by now!

http://www.flexseal.co.uk/products/fl-adaptor.htm