Mortar - how long will it last ? - How long should ready made mortar last ?

Patio flagstones (slabs), concrete flags, stone flags including yorkstone and imported flagstones.
daveaasmith
Posts: 19
Joined: Tue Nov 21, 2006 8:57 pm
Location: huddersfield

Post: # 15579Post daveaasmith

Having recently laid my patio, I am in the middle of pointing it up. I am fortunate enough to live on a building site (well, Barratts are still building at the end of the cul-de-sac) and so have been able to 'acquire' some fresh ready made mortar, right on my doorstep within 10 minutes of the lorry delivering it.

My question is, how long will the mortar last before it becomes unusable?

The lorry usually delivers the mortar on a Saturday, roughly covered with plastic and the builders use it on Monday/Tuesday. The mortar I have was from last Saturday and I commenced pointing on Sunday, yesterday and today. I have it in a big plastic box, with plastic sheeting sealing the top. It is definitly getting drier, but still very soft. I intend to complete the pointing next Saturday (so a week after it was delivered).

Is there an issue with it being a week old, or is it simply further along it's 'going off' duration? So as long as I can still point with it, it will still go off?

The reason I ask is that brick laying has finished so no more deliveries are expected.

Many thanks ...... Dave

PS - when I've finished the patio I will post some photos - it is a 30 square metre combination of grey riven slabs (three sizes 600x600mm, 600x300mm and 300x300mm) with a cream (slightly peach) mortar - it will be enclosed by new oak sleepers (stacked two high) with inset spotlights (hopefully!).

Stuarty
Posts: 637
Joined: Sat Mar 18, 2006 7:35 pm
Location: Edinburgh

Post: # 15580Post Stuarty

Its the mortar allready mixed ? im not sure if im confused by your post or confused by myself :/

daveaasmith
Posts: 19
Joined: Tue Nov 21, 2006 8:57 pm
Location: huddersfield

Post: # 15581Post daveaasmith

yeah, the mortar is ready mixed, came (slopped) out of cement mixer type lorry !!!

Stuarty
Posts: 637
Joined: Sat Mar 18, 2006 7:35 pm
Location: Edinburgh

Post: # 15582Post Stuarty

I have honestly no idea heh! Everytime ive done work on the sites, they have always had the mix delivered into the silos. Only seen concrete dumped in heaps for kerbing etc etc

daveaasmith
Posts: 19
Joined: Tue Nov 21, 2006 8:57 pm
Location: huddersfield

Post: # 15583Post daveaasmith

They used to deliver the mortar into the silo but now the development is drawing to an end, they deposite it in the (approx) 0.5 cubic meter tubs and move it around the site. The silo used to have a big lime on the side of it, if that means anything (lime mortar???).

My second question is that of rain - it's been dry as a bone during the day while I've been pointing, but raining like a bad'un every night - should this cause problems with the mortar setting? It's getting harder each day, so I'm not overly concerned at the moment.

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 15586Post lutonlagerlout

the mortar has retardent in it so it should last 4-5 days,personally i dont like it and wouldnt recommend it
if you can use it quickly its ok but the retardent stops it setting for ages
cheers LLL :)
"what,you want paying today??"

YOUR TEXT GOES HERE

daveaasmith
Posts: 19
Joined: Tue Nov 21, 2006 8:57 pm
Location: huddersfield

Post: # 15592Post daveaasmith

when you say you don't like it, is it because of the retardent delay, or have you seen issues with its use?

also are you saying that after 7 days there is no point using it as it will not set properly?

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 15597Post lutonlagerlout

i worked on big jobs where they use it for convenience ,but i always found it too runny on day 1 and by day 3 it was like floor screed.
sand and cement are dirt cheap it would probably only cost £15 tops to point a patio and you can knock up a nice strong gauge and the consistency you need
bricklaying mortar is a tad on the weak side for a patio
hope this helps ya
cheers LLL :)
"what,you want paying today??"

YOUR TEXT GOES HERE

daveaasmith
Posts: 19
Joined: Tue Nov 21, 2006 8:57 pm
Location: huddersfield

Post: # 15614Post daveaasmith

thanks for all the responses on this question.

i sort of answered my own question today when i had a look at the mortar in my garage - it has set solid!!! so i got 4-5 days out of it, exactly as LLL said!!!

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 15624Post lutonlagerlout

so now you have a wrecked bucket as well :;):
if you get anymore try and use it on about day 3
it will be stiff enough then
regards LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

seanandruby
Site Admin
Posts: 4713
Joined: Mon Jun 26, 2006 11:01 am
Location: eastbourne

Post: # 15661Post seanandruby

i think eventually it will creck badly and crumble. brickies on my job added more cement to make it workable for blocks. so they might as well just had sand and cement. the weight of the brickwork helps with it but it can be live for days. i was made to build manholes with this stuff and it was murder when they came to tarmac, i had to follow them round and do them again.
sean

daveaasmith
Posts: 19
Joined: Tue Nov 21, 2006 8:57 pm
Location: huddersfield

Post: # 15737Post daveaasmith

oh no, you really think it will be that bad ?!!?? it's down now so we will have to see :(

it seems to be rock solid now though, and the joints are 5mm wide and filled 30mm deep with the stuff; the mortar was brushed well so appears just below the surface of the slabs

i never saw any of the brickies add anything to it when they laid the yorkstone when building the houses around us, so maybe it's good enough? or are you saying it's just not as good for patios?

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 15740Post lutonlagerlout

yorkstone eh??
are you sure its sand and cement and not lime mortar they were using??
cheers LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

Stuarty
Posts: 637
Joined: Sat Mar 18, 2006 7:35 pm
Location: Edinburgh

Post: # 15744Post Stuarty

a Brickies mix and a pointing mix have different properties becuase they do different jobs. I personally wouldnt use it to point tbh.

daveaasmith
Posts: 19
Joined: Tue Nov 21, 2006 8:57 pm
Location: huddersfield

Post: # 15747Post daveaasmith

i thought it was lime mortar, it is the same stuff that they put into the big silo (which had a picture of a lime on the side of it), and it is the stuff they are currently doing the bricklaying with (well not at the exact moment as they've gone home!!!).

Post Reply