Hi
I have had a number of people come to quote for block paving and different contractors seem to be suggesting different ground preparation:-
One suggested 150mm Type 1 MOT
Another suggest laying blocks ontop of a concrete base
A third suggest re-enforcing with steel
Can anyone advise what is the best ground prepsation. I live a part of long with clay soil.
Cheers
Robert
Ground preparation for block paving - What is the best ground preparation?
-
Dave_L
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
What is the existing surface sassoor? Concrete?
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
Stuarty
- Posts: 637
- Joined: Sat Mar 18, 2006 7:35 pm
- Location: Edinburgh
Normally for a small domestic drive we dig out 200 below finished height, 100mm MOT, 50mm sand and 50mm block. If the soil at 200 below is still fairly soft, we would dig out a further 50mm to give it a sound base. Thats a flexible construction.
Rigid construction, would have a concrete base, id expect mesh to be in the concrete for additional stregnth. We very very rarely use this method for domestic drives. Usually only do this when specifically requested by the client or when it will have to take alot of weight, wagons and the likes.
Rigid construction, would have a concrete base, id expect mesh to be in the concrete for additional stregnth. We very very rarely use this method for domestic drives. Usually only do this when specifically requested by the client or when it will have to take alot of weight, wagons and the likes.
-
lutonlagerlout
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
sassoor
- Posts: 8
- Joined: Tue Oct 24, 2006 12:18 am
- Location: London
I am getting the impression that for small domestic drives one usually expects MOT/sand and for commercial premises they lay on concrete - is that an accurate summary?
Our situation is that we have a wheelchair bound son which means that we will be taking relatively heavy vehicles onto the drive (and they are likely to get heavier as he grows up and the family size grows). Also, because of wheeling the wheelchair in and out, the drive sinking would be more of a problem for us than it might be for most people (where perhaps it might be unsightly, but is less likely to cause functional problems).
On that basis would you recommend laying on concrete for our domestic drive or are there other downsides about laying on concrete that would steer us away from that?
Thanks
Robert
PS I looked in the FAQ referred to, but could not find anything that indicated which of the methods (ie flexible versus rigid) were recommended in which circumstances, and certainly not whether in our case we should be looking for something different from the norm
Our situation is that we have a wheelchair bound son which means that we will be taking relatively heavy vehicles onto the drive (and they are likely to get heavier as he grows up and the family size grows). Also, because of wheeling the wheelchair in and out, the drive sinking would be more of a problem for us than it might be for most people (where perhaps it might be unsightly, but is less likely to cause functional problems).
On that basis would you recommend laying on concrete for our domestic drive or are there other downsides about laying on concrete that would steer us away from that?
Thanks
Robert
PS I looked in the FAQ referred to, but could not find anything that indicated which of the methods (ie flexible versus rigid) were recommended in which circumstances, and certainly not whether in our case we should be looking for something different from the norm
-
Stuarty
- Posts: 637
- Joined: Sat Mar 18, 2006 7:35 pm
- Location: Edinburgh
Its always depenadant on what kind of traffic will be used on the area. If there isnt much price difference between the rigid and flexi specs the choice is entirely up to yourself.
We done a similar job about a month ago for a scouts organization, dealing mainly with disabled children, and we used MOT on that job. Main thing is getting it all as compacted as possible. Where the lorry to empty the septic tank was to be driven onto we used thicker blocks, obviously the base was solid enough for the wagon to go on anyway.
It also depends how thick the proposed concrete base is to be, its no use if its a small scattering, know what i mean
We done a similar job about a month ago for a scouts organization, dealing mainly with disabled children, and we used MOT on that job. Main thing is getting it all as compacted as possible. Where the lorry to empty the septic tank was to be driven onto we used thicker blocks, obviously the base was solid enough for the wagon to go on anyway.
It also depends how thick the proposed concrete base is to be, its no use if its a small scattering, know what i mean
-
lutonlagerlout
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
