Tarmac drive - Low spot
-
ibw123
- Posts: 1
- Joined: Fri Oct 20, 2006 5:09 pm
- Location: Bromsgrove (Worcs)
My tarmac drive is on a 1 in 10 upslope from my house to the road. The pavement crossover is of a concrete composition and a low spot has developed where the tarmac drive meets the crossover, possibly due to the fact that I now have a 1.5Tonne Jaguar. The low spot means that the bottom of the car scrapes the drive. I need to raise the low spot by only 1 inch or so in an area of approx 24"x24".How can this be best achieved?
-
lutonlagerlout
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
if its the public footpath you will need to contact your local council highways department and tell them there is a sunken footpath (trip hazard)if it is your land dig the falgs up and bed them up an inch with a 1:10 cement sharp sand mixture
i think it is illegal to touch a public footpath now so best check mate
cheers LLL
i think it is illegal to touch a public footpath now so best check mate
cheers LLL
-
Dave_L
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
Can you post up a picture of the sunken area?
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page