Inspection chamber
-
- Posts: 2
- Joined: Thu Sep 07, 2006 2:50 pm
- Location: Sheffield
Just a quick question, what would be the min size for a man access rectangular inspection chamber approx. 1.7-2.0m deep?
Its for access to ducts, not drainage pipes but I would think the principle is the same.
Cheers
PS. just found this site, excellent info and huge coincidence I was brought up in Culcheth from aged 4 until I left at 20!
Its for access to ducts, not drainage pipes but I would think the principle is the same.
Cheers
PS. just found this site, excellent info and huge coincidence I was brought up in Culcheth from aged 4 until I left at 20!
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
Fitted a 600 x 450 shallow type Trojan cover to a 2m deep stormwater inspection/collection chamber today - climbed down inside (to clean up afterwards) with ease.
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
haha! Nah, the weight is falling off me at the moment Tony, I'm loosing my beer belly!
Had a couple of pasties yesterday, does that count? :p
Had a couple of pasties yesterday, does that count? :p
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
1000 x 675
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Site Admin
- Posts: 4713
- Joined: Mon Jun 26, 2006 11:01 am
- Location: eastbourne
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
yes that was the problem,too much rabbit food not enough pastiestony you bad boy pasties are bad for you with your stomach problem
as an aside, as anyone who does building work knows, you need to eat to work 8 hrs a day digging,flagging etc. my missus survives on an apple and a rice cake all day at her keyboard,that just aint possible on site
going to buy a paslode nail gun now,now that is a boys toy!!
tony
-
- Site Admin
- Posts: 4713
- Joined: Mon Jun 26, 2006 11:01 am
- Location: eastbourne
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Site Admin
- Posts: 4713
- Joined: Mon Jun 26, 2006 11:01 am
- Location: eastbourne
man cz its storm water. you never know what filters in m8. i was working on a storm run and had to have water tested because it made my eyes sore and got a skin reaction, imagine if i was in deep? this stuff flowed into the river and killed thousands of fish. they got a massive fine. as you know its best to lift the lids up and down the run for air circulation. always err on the side of caution.
sean
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
The one in question we were involved in this week was a very dry storm drain. Wouldn't be too keen to go down into a foul one though......although we do far worse jobs with foul drainage though........seanandruby wrote:it worries me to hear some of you lads go down these manholes (2.00 m)is quite deep. do you use gas detector?
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
- Site Admin
- Posts: 4713
- Joined: Mon Jun 26, 2006 11:01 am
- Location: eastbourne