Built a wall with 100mm concrete blocks which are now rendered. 140mm copings aren't wide enough as the wall is now 130mm odd wide.
I have seen 160mm wide copings but when I saw them they had a centre height of 60mm and a side height of 50mm, and looked awful.
The 140mm copings have a centre height of 50mm and side height of 25mm.
Ideally I want a 160mm wide height coping with centre height of 50mm ish and side height of 30mm ish.
Can I find something to meet this critiera? Nope.
Any pointers as to where I can?
Wall copings
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
to be honest those thin coping look and are a bit rubbish,kids knock them off with footballs,i know the bigger ones are more expensive but they are more likely to stay put
how about a double tile creasing with a blue stafford laid flat on top?? make a nice feature of it
also normally you put the copings on before you render the wall it gives the spread something to finish to...
regards tony
how about a double tile creasing with a blue stafford laid flat on top?? make a nice feature of it
also normally you put the copings on before you render the wall it gives the spread something to finish to...
regards tony
-
- Posts: 14
- Joined: Wed Jul 12, 2006 1:22 pm
- Location: Herts