Tack coat & tarmac

Setts and cobbles, tarmac, asphalt, resin systems, concrete whether it's plain, patterned or stencilled, gravels, etc.
Post Reply
dhartworks
Posts: 1
Joined: Thu Aug 03, 2006 8:10 pm
Location: blackpool lancashire

Post: # 13223Post dhartworks

Hi

I have just had my drive scraped back and retarmaced in a strange type of red tarmac (can only describe it as burgundy)

I have discovered that a tack coat was not applied prior to tarmacing.

How important is the tack coat , is it an industry standard to apply it when overlaying onto concrete.

I am currently with holding payment.

I would be grateful of any advice

Many Thanks
David

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 13270Post Dave_L

It would be considered normal practice to apply a tack coat onto concrete if overlaying.

Not an ideal situation, it would be better for the concrete to be broken up and removed.
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 13272Post lutonlagerlout

im not really a tarmacer but i have worked on the tarmac in times of need,i have seen it done both ways ,and really what is important is what you were priced for.
if you said "i want a budget job,to brighten it up" then what they have done is what you asked for.
if you said "i want the best possible job" and they said they would do A,B,C, and they havent, then you are probably right to withhold
really it all depends what you were quoted for
sometimes you have to question the motives of people who start telling you what they think should have been done after the job has been done,if they know so much why didn't they do it???
regards tony
"what,you want paying today??"

YOUR TEXT GOES HERE

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 13286Post Dave_L

"Read the quote" (and make sure you are comparing like with like)

Now how true is that?

"Oh....you didn't get the job because you were £700 dearer compared to contractor x"

"Read the quote! We quoted for 6mm SMA whereas contractor x was just laying standard surface course!"
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

Post Reply